Unit of competency Outline
Date retreived
22/07/2026 10:00 PM AWST
22/07/2026 10:00 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Inspect meat for defects
Inspect meat for defects
Unit of competency
National Code
AMPA2068
AMPA2068
State Code
BBA21
BBA21
TGA Status
Replaced
Replaced
DTWD Status
Transition (Replaced)
Transition (Replaced)
State Implementation and Classification
Approved Date
13/12/2016
Field of Education
030307 - Food Processing Technology
Original Release Date
13/12/2016
Nominal Hours
40
Description
This unit describes the skills and knowledge required to routinely inspect meat cuts for defects, contamination and out-of-specification product prior to packing or further processing.This unit is applicable to workers packing meat and offal in abattoirs, boning rooms, knackeries and wild game processing establishments as well as those unpacking and/or inspecting meat prior to further processing.All work should be carried out to comply with workplace and hygiene requirements. This unit applies to individuals who work under general supervision, exercise limited autonomy and have some accountability for their own work.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.\This unit must be delivered and assessed in the context of Australian meat processing standards and regulations.
Notes
Elements and Performance Criteria
1. Inspect meat cuts for defects
- 1.1 Identify types of contamination to be detected including bone chips, fibre, grease, excreta, ingesta and bruising
- 1.2 Consistently detect and trim meat cuts with contamination defects or return them to the slicer for trimming
- 1.3 Promptly report consistent contamination problems to the supervisor
2. Identify meat that is outside specifications
- 2.1 Identify and trim out-of-specification meat or return to trimmer for re-working
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D8825 | MTMP2071C | Inspect meat for defects | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OFJ15 | AMPQUA204 | Inspect meat for defects | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| AD668 | AMPSS00038 | Meat Packer (Boning Room) Skill Set | Skill set |
| AD694 | AMPSS00039 | Meat Packer (Offal Room) Skill Set | Skill set |
| BDI0 | AMP20316 | Certificate II in Meat Processing (Abattoirs) | Qualification |
| BDI4 | AMP20116 | Certificate II in Meat Processing (Food Services) | Qualification |
| BDP6 | AMP20117 | Certificate II in Meat Processing (Food Services) | Qualification |
| AD666 | AMPSS00046 | Pack Meat Products Skill Set | Skill set |