Unit of competency Outline

Date retreived
22/07/2026 11:01 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare surface for road marking

Prepare surface for road marking

Unit of competency
National Code
RIICRM204D
State Code
WH149
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
27/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
27/05/2014
Nominal Hours
12
Description
This unit describes a participant’s skills and knowledge required to prepare surface for road marking in Civil construction.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for preparing surface for road marking
  • 1.1 Access, interpret and apply surface road marking preparation documentation and ensure the work activity is compliant
  • 1.2 Obtain, interpret, clarify and confirm work instructions before proceeding
  • 1.3 Identify and implement traffic management signage requirements
  • 1.4 Select and check for faults plant, tools and equipment to carry out tasks
  • 1.5 Identify, address and report hazards, risks and environmental issues
  • 1.6 Select and wear correct personal protective equipment appropriate for work activities
  • 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Prepare surface and set out
  • 2.1 Remove hazards and fixtures from the area
  • 2.2 Select equipment and/or product and prepare for removing markings
  • 2.3 Identify location for line marking
  • 2.4 Clear area of dirt, debris and other contaminants
  • 2.5 Set out the location for line marking with control points to drawings/job requirements
  • 2.6 Spot straight lines and curves in preparation for marking
  • 2.7 Remove pre-existing visible marks/lines
3. Clean up
  • 3.1 Clear work area and dispose of or recycle materials
  • 3.2 Store unused materials in accordance with job requirements
  • 3.3 Clean, check, maintain and store plant, tools and equipment
  • 3.4 Carry out housekeeping activities
No information
No information
Replaces
State Code National Code Title Type
WB424 RIICRM204A Prepare surface for road marking Unit of competency
Replaced By
State Code National Code Title Type
OCY48 RIICRM204E Prepare surfaces for road marking Unit of competency
State Code National Code Title Type
BFA8 RII30919 Certificate III in Civil Construction Qualification
AZB0 RII30915 Certificate III in Civil Construction Qualification