Unit of competency Outline

Date retreived
22/07/2026 9:12 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare surfaces for road marking

Prepare surfaces for road marking

Unit of competency
National Code
RIICRM204E
State Code
OCY48
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2021
View on TGA
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
030717 - Plant And Machine Operations
Original Release Date
18/06/2021
Nominal Hours
12
Description
This unit describes the skills and knowledge required to prepare surfaces for road marking in civil construction, including clearing surface area, setting out locations for marking and removing pre-existing visible marks.It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take some responsibility for the quality of work outcomes.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan to prepare surface for road marking
  • 1.1 Obtain, interpret, clarify and confirm work instructions
  • 1.2 Access, interpret and apply documentation required to prepare surface for road marking
  • 1.3 Identify and implement traffic management signage requirements
  • 1.4 Select plant, tools and equipment to carry out tasks and check for faults
  • 1.5 Identify and address potential risks, hazards and environmental issues, and implement control measures within scope of own role
  • 1.6 Select and wear personal protective equipment required for work activities
  • 1.7 Obtain and interpret emergency procedures and identify steps required to respond to emergencies
2. Prepare surface and set out
  • 2.1 Remove hazards and fixtures from work area
  • 2.2 Select equipment and product required and prepare equipment to remove markings
  • 2.3 Identify location for line marking according to job requirements
  • 2.4 Clear area of dirt, debris and other contaminants
  • 2.5 Set out location for line marking with control points according to job requirements
  • 2.6 Spot straight lines and curves in preparation for marking
  • 2.7 Remove pre-existing visible marks and lines
3. Conduct clean-up activities
  • 3.1 Clear work area and dispose of or recycle materials according to site requirements
  • 3.2 Store unused materials according to site requirements
  • 3.3 Clean, check, perform maintenance on and store plant, tools and equipment according to manufacturer specifications and site requirements
  • 3.4 Carry out housekeeping activities according to site requirements
No information
No information
Replaces
State Code National Code Title Type
WH149 RIICRM204D Prepare surface for road marking Unit of competency
State Code National Code Title Type
BGL0 RII30920 Certificate III in Civil Construction Qualification