Unit of competency Outline
Date retreived
22/07/2026 5:40 AM AWST
22/07/2026 5:40 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Inspect and service steering systems
Inspect and service steering systems
Unit of competency
National Code
AURTTD002
AURTTD002
State Code
AXA79
AXA79
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to inspect and service steering systems. It involves preparing for the task, inspecting the system, reporting the inspection findings, servicing and adjusting the system, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The steering systems include those of agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to inspect and service steering system
- 1.1 Job requirements are determined from workplace instructions
- 1.2 Servicing information is sourced and interpreted
- 1.3 Hazards associated with the work are identified and risks are managed
- 1.4 Tools, equipment and materials are selected and checked for serviceability
2. Inspect steering system
- 2.1 Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
- 2.2 Inspection results are compared with manufacturer specifications
- 2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
3. Service steering system
- 3.1 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
- 3.2 Post-service testing is carried out according to workplace procedures
4. Complete work processes
- 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use
- 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
- 4.3 Tools and equipment are checked and stored according to workplace procedures
- 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF404 | AURTTD2002 | Inspect and service steering systems | Unit of competency |