Unit of competency Outline

Date retreived
22/07/2026 1:09 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assist with bump in and bump out of shows

Assist with bump in and bump out of shows

Unit of competency
National Code
CUASTA212
State Code
ODH44
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
16/04/2021
View on TGA
State Implementation and Classification
Approved Date
26/11/2021
Field of Education
080399 - Business And Management, N.e.c.
Original Release Date
26/11/2021
Nominal Hours
80
Description
This unit describes skills and knowledge required to assemble, pack, load and unload physical elements for productions in the screen, media, entertainment and events industries. It involves preparing physical elements to be transported, moving elements upon arrival and confirming no damage has been sustained during transportation.The unit applies to those who assist with moving and loading production equipment under the direct supervision of experienced personnel.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare physical elements for transportation
  • 1.1 Assemble and dismantle physical elements in order according to instructions and documentation
  • 1.2 Pack physical elements using applicable techniques and materials according to work health and safety requirements
  • 1.3 Prepare and pack tools required for bump in and bump out
2. Move physical elements
  • 2.1 Assist to load and unload physical elements in order according to organisational policies and procedures
  • 2.2 Identify hazardous items and load them according to workplace health and safety procedures
  • 2.3 Install and position physical elements in applicable work and storage area according to instructions and documentation
  • 2.4 Assist required personnel to inspect load prior to transportation and confirm all items are loaded according to instructions and documentation
  • 2.5 Clear and clean work areas according to organisational procedures
3. Finalise activities
  • 3.1 Check condition of physical elements and confirm no damage has occurred during bump in or bump out
  • 3.2 Inform required personnel of items that need repair and complete documentation as required
  • 3.3 Seek feedback on own work performance and note areas for improvement
No information
No information
Replaces
State Code National Code Title Type
WI215 CUASTA202 Assist with bump in and bump out of shows Unit of competency