Unit of competency Outline

Date retreived
22/07/2026 6:43 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assist with bump in and bump out of shows

Assist with bump in and bump out of shows

Unit of competency
National Code
CUASTA202
State Code
WI215
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
15/01/2016
View on TGA
State Implementation and Classification
Approved Date
16/05/2014
Field of Education
080399 - Business And Management, N.e.c.
Original Release Date
16/05/2014
Nominal Hours
80
Description
This unit describes the performance outcomes, skills and knowledge required to assemble, pack, load and unload physical elements for productions in the screen, media, entertainment and events industries.At this level, individuals are working under the direct supervision of experienced personnel.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare physical elements for transportation
  • 1.1 Assemble or dismantle physical elements in the correct order according to instructions and documentation to ensure ease of packing, loading, unloading and installation
  • 1.2 Pack physical elements safely using appropriate techniques and materials to avoid damage during transportation
  • 1.3 Prepare and pack tools required for bump in and bump out
2. Move physical elements
  • 2.1 Load and unload physical elements in the correct order, taking care to avoid damage
  • 2.2 Use safe manual-handling techniques throughout the loading and unloading process to avoid injury and damage
  • 2.3 Identify hazardous items and load them in a manner that minimises risk to health and safety
  • 2.4 Install or position physical elements in appropriate work or storage area according to directions
  • 2.5 Inspect load prior to transportation to ensure that all items are loaded appropriately, and make adjustments as required
  • 2.6 Clear and clean work areas according to organisational procedures
3. Finalise activities
  • 3.1 Check the condition of physical elements to ensure that no damage has occurred during bump in or bump out
  • 3.2 Inform relevant personnel of items that need repair and complete documentation as required
  • 3.3 Seek feedback on own work performance and note areas for improvement
No information
No information
Replaces
State Code National Code Title Type
D1614 CUETGE15B Handle physical elements during bump in/bump out Unit of competency
Replaced By
State Code National Code Title Type
ODH44 CUASTA212 Assist with bump in and bump out of shows Unit of competency