Unit of competency Outline

Date retreived
22/07/2026 10:45 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Create pattern to meet design specifications applying advanced pattern-making principles

Create pattern to meet design specifications applying advanced pattern-making principles

Unit of competency
National Code
LMTFD4010B
State Code
W7229
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
16/07/2011
View on TGA
State Implementation and Classification
Approved Date
03/11/2008
Field of Education
030107 - Garment Making
Original Release Date
03/11/2008
Nominal Hours
80
Description
This unit covers the skills and knowledge to create patterns using an existing block, and applying advanced pattern-making principles.
Notes
Elements and Performance Criteria
1 Prepare workstation
  • 1.1 Workstation and seating are set up according to OHS practices and specifications for work.
  • 1.2 Pattern-making tools and equipment are selected and prepared.
  • 1.3 Any additional materials and equipment required to perform task are collected.
  • 1.4 Pattern-making tools, equipment and supplies are laid out for efficient and safe operation.
2 Interpret the design
  • 2.1 Design drawings and specifications are interpreted and clarified.
  • 2.2 Design lines and style features are identified.
  • 2.3 Fabric characteristics and performance, and trims and finishings are considered in relation to design.
  • 2.4 Any special construction methods or trim details of garment are considered in relation to design.
  • 2.5 Ease allowance is determined.
  • 2.6 Details of base size are obtained.
3 Select block
  • 3.1 Pattern production is planned.
  • 3.2 Appropriate block is determined for development of pattern.
  • 3.3 Appropriate block is selected and retrieved from storage system.
4 Create pattern
  • 4.1 Advanced patternmaking principles are applied in developing pattern.
  • 4.2 Methods and formulas used are documented.
  • 4.3 Pattern is produced from existing block to specified design.
  • 4.4 Pattern pieces are checked for accuracy of seam allowances, ease allowance, seam match, hems and functional openings.
  • 4.5 Pattern pieces are labelled and markings completed.
5 Test and finalise pattern
  • 5.1 Toile or garment segments are tested as appropriate.
  • 5.2 Toile or garment segments are examined and assessed against design specifications.
  • 5.3 Any pattern alterations are completed and assessed to meet specifications.
  • 5.4 Pattern is finalised and checked to ensure accuracy, completeness and compliance to design specifications.
6 Prepare pattern documentation for production
  • 6.1 Sizing system for pattern and base size are identified.
  • 6.2 Spreadsheet of full range for selected sizing system is prepared with essential measurements.
  • 6.3 Grade table for full size range is prepared.
  • 6.4 Pattern specification sheets with trade drawings are completed and attached to patterns for storage.
  • 6.5 Work order for sizing labels is prepared as required.
  • 6.6 Finished patterns are filed.
RANGE STATEMENT
The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
Pattern-making tools and equipment may include:
blocks
scissors
square rule
marker pens
hole punch
pins
fashion triangle
French curve
pattern notcher
weights
tape measure
Style features may include:
garment type, collar, sleeves, yoke, sides, openings, neckline, buttons, seams, zips, gathers, pleats, panels, tucks
Advanced pattern-making principles include:
pivoting
square blocking
contouring
Pattern markings include:
appropriate seam allowance
notching
pattern information (size, style number, cutting instructions and identity)
darts
drill holes
grain line
stitching line
Methods and formulas may include:
deviations from standard patterns
sources of pattern components
pattern derivation methods and formulas
block construction methods and formulas
application of current industry practice
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Critical aspects of evidence
Demonstrates skills and knowledge to:
identify and define design lines and features
choose existing block to suit work specifications
create, check and test patterns
make toile
communicate effectively with design team, customers, etc.
apply OHS practices
maintain accurate records

Consistency in performance
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment

Resource implications
Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.

Context for assessment
Assessment may occur on the job or in an appropriately simulated environment.

Interdependent assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
State Code National Code Title Type
W6522 LMTFD4010A Create pattern to meet design specifications applying advanced patternmaking principles Unit of competency
Replaced By
State Code National Code Title Type
BAW85 MSTFD4010 Create pattern to meet design specifications applying advanced patternmaking principles Unit of competency