Unit of competency Outline

Date retreived
22/07/2026 9:43 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare and restore work site

Prepare and restore work site

Unit of competency
National Code
NWPNET002
State Code
AVY84
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
07/12/2015
View on TGA
State Implementation and Classification
Approved Date
15/04/2016
Field of Education
120505 - Work Practices Programmes
Original Release Date
15/04/2016
Nominal Hours
40
Description
This unit describes the skills required to prepare work sites. The ability to follow work instructions, use a range of equipment and tools to prepare a safe work site and subsequently to restore the site to the required condition is essential to satisfactory performance.This unit applies to those working as field and operational staff performing a wide range of functions that support construction, maintenance and operations processes.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to, particularly those related to WHS and manufacturer specifications.Those undertaking this unit would work under supervision, performing routine tasks, in mostly familiar contexts.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for work
  • 1.1 Determine site preparation requirements from specifications, instructions and pre-work inspections.
  • 1.2 Identify and report potential hazards to public and environment and assess risks.
  • 1.3 Perform a site check according to legislative and organisational requirements to identify risks and prevent damage to other utilities.
  • 1.4 Select and check work site equipment, tools and materials as appropriate to meet task and safety specifications.
  • 1.5 Select, fit and use personal protective equipment.
2. Prepare work site
  • 2.1 Position safety equipment and materials to prevent potential risks to public and environment.
  • 2.2 Store and secure equipment and materials.
  • 2.3 Use work site equipment, manual or mechanical excavation equipment, tools and materials.
  • 2.4 Provide appropriate drainage and diversion of site inflows from work site without damage to environment.
3. Restore work site
  • 3.1 Backfill and compact excavations according to specifications.
  • 3.2 Remove excess soil, debris and unwanted materials from site.
  • 3.3 Restore work site to meet environmental and organisational requirements using equipment, tools and materials.
4. Review, record and report activities
  • 4.1 Check, maintain and store equipment, tools and materials.
  • 4.2 Maintain workplace records.
No information
No information
Replaces
State Code National Code Title Type
D1848 NWP226B Prepare and restore work site Unit of competency
Replaced By
State Code National Code Title Type
OBN96 NWPNET019 Prepare and restore worksite Unit of competency