Unit of competency Outline
Date retreived
22/07/2026 12:45 AM AWST
22/07/2026 12:45 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Apply and handle films and coated glass
Apply and handle films and coated glass
Unit of competency
National Code
LMFGG3006C
LMFGG3006C
State Code
S7823
S7823
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
19/03/2012
Field of Education
040323 - Glazing
Original Release Date
19/03/2012
Nominal Hours
48
Description
This unit of competency covers the skills and knowledge required to prepare glass surfaces and apply window film and coating.
Notes
Elements and Performance Criteria
1 Identify work requirements
- 1.1 Work requirements in the form of type and quantity of glass and type and colour/nature of coating/film and related materials are identified from work instructions
- 1.2 Occupational health and safety (OHS) requirements for application of coating/film to glass, including personal protective equipment, are observed throughout the work
- 1.3 Tools, equipment, accessories and materials are identified for the application of coating/film in accordance with workplace procedures
- 1.4 Materials safety data sheets (MSDS) and/or product application and safety information are read and used to guide work practices
- 1.5 Particular process techniques, time and safety requirements are noted and used to plan work, and the appropriate process for applying coating/film to glass are identified
2 Prepare for work
- 2.1 Work sequence is planned in a logical order to suit the job
- 2.2 Tools, equipment and materials are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition
- 2.3 Coating/film to be applied is checked for defects or damage
- 2.4 Surfaces are measured and materials and templates cut without causing damage according to accepted industry methods, materials and procedures
- 2.5 Glass is checked for damage and suitable preparation, and cleaned/prepared using approved methods, materials and equipment following coating/film product manufacturer instructions and/or workplace practices
- 2.6 Any faults/flaws are identified and reported in accordance with workplace procedures
- 2.7 Appropriate workplace documentation is completed and handled, as required, by measuring, cutting and surface preparation outcomes
3 Apply coating/film
- 3.1 Equipment and accessories are used to handle the coating/film in accordance with manufacturer and workplace instructions
- 3.2 Surfaces are kept clean and free of contamination according to the specifications and procedures for materials/product used
- 3.3 Problems occurring during operation are identified and reported to appropriate persons in accordance with workplace procedures, and any authorised changes in working procedures and/or requirements followed
4 Inspect tinted product and refurbish work area
- 4.1 Glass is inspected and any film faults rectified in accordance with workplace procedures
- 4.2 Australian Standard sticker is applied, if appropriate
- 4.3 Tinted/coating products are removed for storage/further processing as required by workplace procedures
5 Complete work
- 5.1 Waste and scrap material is removed for disposal or recycling, as required
- 5.2 Work area is cleaned and rubbish disposed of, as appropriate
- 5.3 Tools, equipment and unused materials are removed and stored appropriately
- 5.4 Appropriate workplace documentation to reflect application and inspection is completed and handled as required by workplace procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Glass includes:
annealed, laminated or toughened glass for:
automotive
domestic and commercial glass
mirrors
shower screens and furniture glass
Coating/film may include, but is not limited to:
solar
reflective
tinted
safety
security and decorative film
Materials may include, but are not limited to:
window film
coatings
trim and scraper blades
slip solution
glass cleaner
soft coat glass
hard coat glass
adhesive remover and other consumables (e.g. towel and steel wool)
Personal protective equipment includes:
that prescribed under legislation, regulation and enterprise policies and practices, and may include:
gauntlets
gloves
safety glasses
safety footwear
aprons and overalls
Tools and equipment are to include:
squeegees and holsters
five-way cutting-in tools
edge bumping gold card tools
hard edge spear cards
screen wiping tools
trim knives
scrapers
scourers
measures
drop sheets
calculator
chamois
steamers
heat guns
flushing units
filter units
hand tools (e.g. pliers, files, screwdrivers and spanners)
Workplace procedures include:
coating/film manufacturer specifications and instructions
vehicle manufacturer specifications/insurance company instructions/statutory requirements, including ADRs
customer requirements
workplace procedures relating to the handling and movement of glass and the application of coating/film
safety standards, including personal protective equipment, OHS regulations, enterprise requirements and special requirements specified by MSDS and instructions
work instructions, including job sheets, cutting lists, plans, drawings and designs
quality and Australian Standards and procedures
Glass includes:
annealed, laminated or toughened glass for:
automotive
domestic and commercial glass
mirrors
shower screens and furniture glass
Coating/film may include, but is not limited to:
solar
reflective
tinted
safety
security and decorative film
Materials may include, but are not limited to:
window film
coatings
trim and scraper blades
slip solution
glass cleaner
soft coat glass
hard coat glass
adhesive remover and other consumables (e.g. towel and steel wool)
Personal protective equipment includes:
that prescribed under legislation, regulation and enterprise policies and practices, and may include:
gauntlets
gloves
safety glasses
safety footwear
aprons and overalls
Tools and equipment are to include:
squeegees and holsters
five-way cutting-in tools
edge bumping gold card tools
hard edge spear cards
screen wiping tools
trim knives
scrapers
scourers
measures
drop sheets
calculator
chamois
steamers
heat guns
flushing units
filter units
hand tools (e.g. pliers, files, screwdrivers and spanners)
Workplace procedures include:
coating/film manufacturer specifications and instructions
vehicle manufacturer specifications/insurance company instructions/statutory requirements, including ADRs
customer requirements
workplace procedures relating to the handling and movement of glass and the application of coating/film
safety standards, including personal protective equipment, OHS regulations, enterprise requirements and special requirements specified by MSDS and instructions
work instructions, including job sheets, cutting lists, plans, drawings and designs
quality and Australian Standards and procedures
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Assessment processes and techniques must be culturally appropriate and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently:
identify film products and equipment required and plan the work sequence
interpret work order/job instruction and locate and apply relevant information in handling and application of different coatings and films
apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
as a minimum:
indicate ideal shapes for accurate pattern making
demonstrate a sound knowledge of glass types and the need for care in cutting both film, glass and coating procedures
demonstrate accuracy in cutting film from patterns and trimming film on glass
demonstrate knowledge of the handling and processing of filmed and/or coated glass products
demonstrate knowledge of cleaning all types of glass to ensure it is correctly prepared in accordance with coating/film manufacturer recommendations prior to coating/film applications
follow manufacturer guidelines for correct processing procedures for the application of various films and coated products
demonstrate knowledge of film/coating manufacture to ensure correct handling, storage and application of the products
work effectively with others.
Context of and specific resources for assessment
The application of competency is to be assessed in the workplace or realistically simulated workplace.
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints.
Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context.
Assessment is to comply with relevant regulatory or Australian Standard requirements.
The following resources should be made available:
film/coating materials
coated and uncoated glass sheet/product for processing
an appropriate work area
tools
personal protective equipment
cleaning and other consumables
work orders.
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the LMF02 Furnishing Industry Training Package.
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge.
Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure correct interpretation and application.
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.
Assessment may be in conjunction with assessment of other units of competency.
Guidance information for assessment
Overview of assessment
Assessment processes and techniques must be culturally appropriate and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently:
identify film products and equipment required and plan the work sequence
interpret work order/job instruction and locate and apply relevant information in handling and application of different coatings and films
apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
as a minimum:
indicate ideal shapes for accurate pattern making
demonstrate a sound knowledge of glass types and the need for care in cutting both film, glass and coating procedures
demonstrate accuracy in cutting film from patterns and trimming film on glass
demonstrate knowledge of the handling and processing of filmed and/or coated glass products
demonstrate knowledge of cleaning all types of glass to ensure it is correctly prepared in accordance with coating/film manufacturer recommendations prior to coating/film applications
follow manufacturer guidelines for correct processing procedures for the application of various films and coated products
demonstrate knowledge of film/coating manufacture to ensure correct handling, storage and application of the products
work effectively with others.
Context of and specific resources for assessment
The application of competency is to be assessed in the workplace or realistically simulated workplace.
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints.
Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context.
Assessment is to comply with relevant regulatory or Australian Standard requirements.
The following resources should be made available:
film/coating materials
coated and uncoated glass sheet/product for processing
an appropriate work area
tools
personal protective equipment
cleaning and other consumables
work orders.
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the LMF02 Furnishing Industry Training Package.
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge.
Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure correct interpretation and application.
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.
Assessment may be in conjunction with assessment of other units of competency.
Guidance information for assessment
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W8680 | LMFGG3006B | Apply film to glass | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI489 | MSFGG3007 | Apply and handle films and coated glass | Unit of competency |
