Unit of competency Outline
Date retreived
22/07/2026 1:33 PM AWST
22/07/2026 1:33 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Apply film to glass
Apply film to glass
Unit of competency
National Code
LMFGG3006B
LMFGG3006B
State Code
W8680
W8680
TGA Status
Deleted
Deleted
DTWD Status
Deleted
Deleted
State Implementation and Classification
Approved Date
11/06/2010
Field of Education
040323 - Glazing
Original Release Date
11/06/2010
Nominal Hours
48
Description
This unit addresses the knowledge and skills required to prepare glass surfaces and cut and apply window film.
Notes
Elements and Performance Criteria
1. Identify work requirements
- 1.1. Work requirements in the form of type and quantity of glass and type and colour/nature of film are identified from work instructions
- 1.2. Workplace health and safety requirements for application of film to glass, including personal protection needs, are observed throughout the work
- 1.3. Equipment, accessories and materials are identified for the application of film in accordance with workplace procedures
- 1.4. Materials Safety Data Sheets and/or product application and safety information are read and used to guide work practices
- 1.5. Particular process techniques, time and safety requirements are noted and used to plan work
- 1.6. The process for applying film to glass is identified
2. Prepare for work
- 2.1. Work sequence is planned in a logical order to suit the job
- 2.2. Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
- 2.3. Film to be applied is checked for defects or damage
- 2.4. Surfaces are measured and materials and templates cut without causing damage according to accepted industry methods, materials and procedures
- 2.5. Glass is cleaned/prepared using approved methods, materials and equipment following film and product manufacturer instructions and/or workplace practices
- 2.6. Glass is checked for damage and suitable preparation
- 2.7. Any faults/flaws are identified and reported in accordance with workplace procedures
- 2.8. Appropriate workplace documentation is completed and handled as required by measuring, cutting and surface preparation outcomes
3. Apply film
- 3.1. Equipment and accessories are used to apply the film in accordance with manufacturers' and workplace instructions
- 3.2. Surfaces are kept clean and free of contamination according to the specifications and procedures for materials/product used
- 3.3. Problems occurring during operation are identified and reported to appropriate persons in accordance with workplace procedures
- 3.4. Authorised changes in working procedures and/or requirements are followed
- 3.5. the application of film outcomes
4. Inspect tinted product and refurbish work area
- 4.1. Windows are inspected and any film faults are rectified in accordance with workplace procedures
- 4.2. Australian Standard sticker is applied if appropriate
- 4.3. Tinted products are removed for storage/further processing as required by workplace procedures
5. Complete work
- 5.1. Waste and scrap material is removed for disposal or recycling as required
- 5.2. Work area is cleaned and rubbish disposed of as appropriate
- 5.3. Appropriate workplace documentation to reflect application and inspection is completed and handled as required by workplace procedures
- 5.4. Tools, equipment and unused materials are removed and stored appropriately
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
OHS requirements may include legislation, standards, building codes, material safety management systems and local safe operating procedures
Work is carried out in accordance with statutory requirements, environment legislation, manual handling procedures and relevant regulations and organisation insurance requirements
Work requires individuals to demonstrate discretion, judgement and problem solving skills in the set up and operation of film application equipment. This may be demonstrated either individually or in a team environment
Work may be performed in workplaces which are involved in the manufacture, processing and/or installation of glass and/or the application of film to glass for domestic, commercial or automotive application. These may be in enterprise facilities or at customer's premises/location
Work is generally performed individually, with general supervision and may be part of a production process
Glass includes:
automotive
domestic and commercial glass
mirrors
shower screens and furniture glass
Glass may be annealed, laminated or toughened
Window film may include but is not limited to:
solar
reflective
tinted
safety
security and decorative film
Tools and equipment are to include:
squeegees and holsters
five-way cutting-in tools
edge bumping gold card tools
hard edge spear cards
screen wiping tools
trim knives
scrapers
scourers
measures
drop sheets
calculator
chamois
steamers
heat guns
flushing units
filter units
hand tools (pliers, files, screwdrivers and spanners)
Materials may include but are not limited to:
window film
trim and scraper blades
slip solution
glass cleaner
adhesive remover and other consumables (towel, steel wool, etc)
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulation and enterprise policies and practices. It may include:
gauntlets
gloves
safety glasses
safety footwear
aprons and overalls
Information and procedures
Film manufacturer specifications and instructions
Vehicle manufacturer specifications/insurance company instructions/statutory requirements (including ADRs)
Customer's requirements
Workplace procedures relating to the handling and movement of glass and the application of film
Safety standards, including personal protective equipment, OHS regulations, enterprise requirements and special requirements specified by MSDS and instructions
Work instructions including job sheets, cutting lists, plans, drawings and designs
Quality and Australian Standards and procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
OHS requirements may include legislation, standards, building codes, material safety management systems and local safe operating procedures
Work is carried out in accordance with statutory requirements, environment legislation, manual handling procedures and relevant regulations and organisation insurance requirements
Work requires individuals to demonstrate discretion, judgement and problem solving skills in the set up and operation of film application equipment. This may be demonstrated either individually or in a team environment
Work may be performed in workplaces which are involved in the manufacture, processing and/or installation of glass and/or the application of film to glass for domestic, commercial or automotive application. These may be in enterprise facilities or at customer's premises/location
Work is generally performed individually, with general supervision and may be part of a production process
Glass includes:
automotive
domestic and commercial glass
mirrors
shower screens and furniture glass
Glass may be annealed, laminated or toughened
Window film may include but is not limited to:
solar
reflective
tinted
safety
security and decorative film
Tools and equipment are to include:
squeegees and holsters
five-way cutting-in tools
edge bumping gold card tools
hard edge spear cards
screen wiping tools
trim knives
scrapers
scourers
measures
drop sheets
calculator
chamois
steamers
heat guns
flushing units
filter units
hand tools (pliers, files, screwdrivers and spanners)
Materials may include but are not limited to:
window film
trim and scraper blades
slip solution
glass cleaner
adhesive remover and other consumables (towel, steel wool, etc)
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulation and enterprise policies and practices. It may include:
gauntlets
gloves
safety glasses
safety footwear
aprons and overalls
Information and procedures
Film manufacturer specifications and instructions
Vehicle manufacturer specifications/insurance company instructions/statutory requirements (including ADRs)
Customer's requirements
Workplace procedures relating to the handling and movement of glass and the application of film
Safety standards, including personal protective equipment, OHS regulations, enterprise requirements and special requirements specified by MSDS and instructions
Work instructions including job sheets, cutting lists, plans, drawings and designs
Quality and Australian Standards and procedures
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work order/job instruction and locate and apply relevant information to apply film to glass
Identify film products and equipment required and plan work sequence
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
As a minimum, demonstrate the ability to:
indicate ideal shapes for accurate pattern making
have a sound knowledge of glass types and the need for care in cutting both film and glass
demonstrate accuracy in cutting film from patterns and trimming film on glass
demonstrate a knowledge of cleaning all types of glass to ensure it is correctly prepared in accordance of film manufacturers' recommendations prior to film application
follow film manufacturers' guidelines for correct squeegee procedure for the application of various films (to be determined by films normally applied in the workplace)
demonstrate a knowledge of film manufacture to ensure correct handling, storage and application of all films
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Film, glass sheet/product for coating, work area, tools, personal protective equipment, cleaning and other consumables and work orders.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment may be in conjunction with assessment of other relevant units of competency .
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant application equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work order/job instruction and locate and apply relevant information to apply film to glass
Identify film products and equipment required and plan work sequence
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
As a minimum, demonstrate the ability to:
indicate ideal shapes for accurate pattern making
have a sound knowledge of glass types and the need for care in cutting both film and glass
demonstrate accuracy in cutting film from patterns and trimming film on glass
demonstrate a knowledge of cleaning all types of glass to ensure it is correctly prepared in accordance of film manufacturers' recommendations prior to film application
follow film manufacturers' guidelines for correct squeegee procedure for the application of various films (to be determined by films normally applied in the workplace)
demonstrate a knowledge of film manufacture to ensure correct handling, storage and application of all films
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Film, glass sheet/product for coating, work area, tools, personal protective equipment, cleaning and other consumables and work orders.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment may be in conjunction with assessment of other relevant units of competency .
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant application equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0327 | LMFGG3006A | Apply film to glass | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| S7823 | LMFGG3006C | Apply and handle films and coated glass | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W034 | LMF30602 | Certificate III in Glass and Glazing | Qualification |
| 1477 | 52262 | Certificate II in Glass Processing | Accredited course |