Unit of competency Outline
Date retreived
23/07/2026 10:40 AM AWST
23/07/2026 10:40 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Assess flooring installation sites
Assess flooring installation sites
Unit of competency
National Code
MSFFL3054
MSFFL3054
State Code
OAJ74
OAJ74
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040321 - Floor Coverings
Original Release Date
22/05/2019
Nominal Hours
25
Description
This unit describes the skills and knowledge required to assess and formally report on the condition of both timber and concrete subfloors and factors in the environment that may impact flooring installation.This unit applies to all flooring technicians responsible for pre-installation inspections.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking flooring work. Industry standards and codes of practice within Australia must also be applied. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1. Prepare for work
- 1.1 Identify and follow work health and safety, legislative and organisational requirements
- 1.2 Identify type of proposed floor covering and other work requirements from customer enquiry or workplace documentation
- 1.3 Determine floor surface requirements for the proposed coverings from manufacturer or workplace information
- 1.4 Obtain and prepare tools, equipment and required materials for the work
2. Assess the installation environment
- 2.1 Identify aspects of the internal and external environment that may affect installation
- 2.2 Investigate the potential interactions between the environment and the proposed flooring
- 2.3 Select appropriate equipment to conduct inspections and tests
3. Assess flooring
- 3.1 Identify the type of floor construction materials and the building floor structure and substructure based on visual inspection
- 3.2 Run and check datum lines and confirm accurate dimensions
- 3.3 Complete required tests in accordance with the approved process and Australian Standards
4. Report findings
- 4.1 Accurately document relevant findings in accordance with current standards and workplace practice
- 4.2 Send copies of the inspection report to appropriate personnel and suitably file in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI361 | MSFFL3003 | Inspect sub-floors | Unit of competency |
| WI334 | MSFFL2004 | Moisture test timber and concrete floors | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OEY65 | MSFFL3107 | Assess flooring installation sites | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BED0 | MSF30818 | Certificate III in Flooring Technology | Qualification |
| J725 | MSF20113 | Certificate II in Furnishing | Qualification |