Unit of competency Outline

Date retreived
23/07/2026 5:14 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install and test lighting equipment

Install and test lighting equipment

Unit of competency
National Code
CUALGT303
State Code
AWI62
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
15/01/2016
View on TGA
State Implementation and Classification
Approved Date
21/07/2016
Field of Education
031301 - Electrical Engineering
Original Release Date
21/07/2016
Nominal Hours
30
Description
This unit describes the skills and knowledge required to prepare, install and test lighting equipment for productions in the screen, media and entertainment industries. It applies to individuals who work as lighting technicians or lighting assistants. They work under supervision and follow lighting plans to rig and patch lights to control systems and test operation of lighting prior to live productions or filming. On some productions and outside broadcasts, a qualified gaffer or chief electrician supervises installation of lighting equipment and required power sources.Testing and tagging of electrical equipment must be carried out by a person with the relevant certificate of competency according to the performance specifications of:Australian Standard 3760: 2000 In-service safety inspection and testing of electrical equipmentAustralian Standard 3002: 1985 Electrical installations - shows and carnivals.In some states and territories, a licensed electrician is required to check the electrical safety of lighting equipment. A licensed rigger is required to install some rigging equipment required for the installation detailed in this unit.
Notes
Elements and Performance Criteria
1. Determine lighting requirements for productions
  • 1.1 Confirm overall lighting requirements with reference to lighting documentation and in consultation with production personnel
  • 1.2 Calculate power requirements and confirm power sources and locations meet production requirements
  • 1.3 Identify patching, colour and focus requirements
  • 1.4 Identify additional equipment or materials needed, and organise acquisition according to enterprise procedures
2. Prepare lighting equipment for installation
  • 2.1 Confirm lighting equipment is safe and operational using appropriate test equipment and in line with enterprise procedures
  • 2.2 Identify and address routine faults and repairs and refer complex matters to technical specialists in line with enterprise procedures
  • 2.3 Prepare and assemble colour, equipment, lanterns and accessories in readiness for installation or transportation
  • 2.4 Pre-rig lighting equipment in line with safety and licensing requirements
  • 2.5 Prepare extension leads, looms and cables to comply with design specifications, enterprise standards and legal requirements
3. Install lighting
  • 3.1 Install rigging and accessories according to legislative and enterprise safety requirements
  • 3.2 Test, install and hang lanterns and accessories according to lighting plans, scale and manufacturer’s specifications
  • 3.3 Install power supplies according to lighting plans, location standards, manufacturer’s specifications and safety regulations
  • 3.4 Patch lanterns and accessories according to lighting or patch plans
  • 3.5 Label rated cabling correctly and secure it safely, neatly and clear of any moving elements
  • 3.6 Angle and focus lanterns according to lighting plans and artistic requirements
  • 3.7 Check safety of equipment during and after installation in line with industry practice and legal requirements, and seek assistance if required
4. Install lighting control system
  • 4.1 Connect dimmers to power, assign and turn on
  • 4.2 Install and configure control desk and peripherals according to production requirements and required timeframes
  • 4.3 Run and connect control cables and secure safely
  • 4.4 Patch lanterns and channels to dimmers according to lighting or patch plan sheets, taking account of location-specific procedures and conditions
5. Check electrical safety
  • 5.1 Complete installation and testing according to legislative and work health and safety (WHS) requirements
  • 5.2 Check three-phase distribution and power calculations in collaboration with licensed electricians as required
  • 5.3 Check and adjust according to safety standards if necessary, that power supply is sufficient for load requirements and distribution of electrical loading is within limits
  • 5.4 Check cables used are correctly rated, including three-phase cable to dimmers, and that three-phase supplies are balanced, and adjust as required
  • 5.5 Check cabling and connectors meet legislative and WHS requirements, and seek assistance if required
6. Test and adjust lighting
  • 6.1 Test lighting, including communication system, control desk and peripherals in line with industry practice and safety requirements
  • 6.2 Identify the need for adjustments and make modifications accordingly
  • 6.3 Confirm lighting installation meets requirements in consultation with production personnel
  • 6.4 Complete and update lighting documentation as required
7. Disassemble lighting equipment
  • 7.1 Break down and carry lighting equipment and accessories in line with safety procedures
  • 7.2 Clean and safely pack equipment to avoid damage and prepare for transport
  • 7.3 Report and document equipment that is damaged or requires maintenance to relevant production personnel
  • 7.4 Leave worksite in the original or improved condition
No information
No information
Replaces
State Code National Code Title Type
D1142 CUFLGT301A Prepare, install and test lighting equipment Unit of competency
Replaced By
State Code National Code Title Type
ODI19 CUALGT313 Install and test lighting equipment Unit of competency