Unit of competency Outline

Date retreived
22/07/2026 1:06 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install and test lighting equipment

Install and test lighting equipment

Unit of competency
National Code
CUALGT313
State Code
ODI19
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
16/04/2021
View on TGA
State Implementation and Classification
Approved Date
26/11/2021
Field of Education
031301 - Electrical Engineering
Original Release Date
26/11/2021
Nominal Hours
30
Description
This unit describes the skills and knowledge required to prepare, install and test lighting equipment for productions in the screen, media and entertainment industries. The unit applies to those who work as lighting technicians or lighting assistants. It involves the preparation and installation of lighting control systems in various production environments. This includes working under supervision and controlling systems and test operation of lighting prior to live productions or filming. Some productions and outside broadcasts require a qualified gaffer or chief electrician to supervise installation of lighting equipment and required power sources.Testing and tagging of electrical equipment must be carried out by a person with the required certificate of competency according to the performance specifications of:Australian Standard 3760: 2000 In-service safety inspection and testing of electrical equipmentAustralian Standard 3002: 1985 Electrical installations - shows and carnivals.In some states and territories, a licensed electrician is required to check the electrical safety of lighting equipment. A licensed rigger is required to install some rigging equipment required for the installation detailed in this unit. Users are advised to check with the relevant licensing authority for requirements.
Notes
Elements and Performance Criteria
1. Determine lighting requirements for productions
  • 1.1 Confirm overall lighting requirements with reference to lighting documentation and in consultation with production personnel
  • 1.2 Calculate power requirements and confirm power sources and locations meet production requirements
  • 1.3 Identify patching, colour and focus requirements according to enterprise procedures
  • 1.4 Identify and acquire additional equipment or materials needed according to enterprise procedures
2. Prepare lighting equipment for installation
  • 2.1 Confirm lighting equipment is safe and operational according to enterprise requirements
  • 2.2 Identify and address routine faults and repairs
  • 2.3 Refer complex matters to technical specialists according to enterprise procedures
  • 2.4 Prepare and assemble colour, equipment, lanterns and accessories in preparation for installation and transportation
  • 2.5 Prepare extension leads, looms and cables to comply with design specifications, enterprise standards and legal requirements
3. Install lighting
  • 3.1 Install rigging and accessories according to legislative and enterprise safety requirements
  • 3.2 Test, install and hang lanterns and accessories according to lighting plans, scale and manufacturer’s specifications
  • 3.3 Install power supplies according to lighting plans, location standards, manufacturer’s specifications and safety regulations
  • 3.4 Patch lanterns and accessories according to lighting and patch plans
  • 3.5 Label rated cabling correctly and secure cabling according to safety requirements
  • 3.6 Install lanterns according to lighting plans and artistic requirements
  • 3.7 Check safety of equipment during and after installation according to industry practice and legal requirements
4. Install lighting control system
  • 4.1 Install and configure control desk and peripherals according to production requirements and required timeframes
  • 4.2 Run and connect control cables according to safety requirements
  • 4.3 Patch DMX, address fixtures and set fixture modes according to requirements
5. Check electrical safety
  • 5.1 Complete installation and testing according to legislative and work health and safety (WHS) requirements
  • 5.2 Check three-phase distribution and power calculations in collaboration with licensed electricians as required
  • 5.3 Check and adjust power supply according to safety standards as required
  • 5.4 Check cables used are correctly rated
  • 5.5 Check cabling and connectors meet legislative and WHS requirements, and seek assistance as required
6. Test and adjust lighting
  • 6.1 Test lighting, including communication system, control desk and peripherals according to industry practice and safety requirements
  • 6.2 Confirm lighting installation meets requirements in consultation with production personnel
  • 6.3 Complete and update lighting documentation as required
7. Disassemble, package and document lighting equipment
  • 7.1 Disassemble and carry lighting equipment and accessories in line with safety procedures
  • 7.2 Clean and safely pack equipment to avoid damage and prepare for transport
  • 7.3 Report and document equipment that is damaged or requires maintenance to required production personnel
  • 7.4 Restore worksite to original or improved condition
No information
No information
Replaces
State Code National Code Title Type
AWI62 CUALGT303 Install and test lighting equipment Unit of competency