Unit of competency Outline

Date retreived
22/07/2026 12:43 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Work safely around aircraft

Work safely around aircraft

Unit of competency
National Code
PUAFIR209
State Code
OAY96
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
16/07/2019
View on TGA
State Implementation and Classification
Approved Date
08/04/2020
Field of Education
061301 - Occupational Health And Safety
Original Release Date
08/04/2020
Nominal Hours
8
Description
This unit of competency involves the skills and knowledge required to apply safe work practices when operating in or around aircraft at an airbase. It includes working safely near aircraft and facilitating safe ground support and it applies to personnel working in the public safety sector who work around aircraft.The fire sector is those sections of government departments, statutory authorities or organisations that have responsibility under jurisdictional arrangements for the delivery of firefighting and fire management services.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Work safely in and around aircraft
  • 1.1 Personal protective clothing and equipment is used, in accordance with operational procedures
  • 1.2 Precautions and clearances are obtained and followed when operating on or near aircraft movement areas
  • 1.3 Any approach to an operating aircraft is made, in accordance with organisational aircraft approach procedures, from an angle visible to the pilot or flight crew and with approval of the pilot or flight crew
  • 1.4 Adequate clearance is maintained from propellers, rotors and/or turbine engines, exhaust gases and engine intakes
  • 1.5 Typical manoeuvring patterns of aircraft are anticipated through activities
  • 1.6 Instructions or signals from pilots or staff controlling aircraft are complied with, in accordance with organisational procedures
  • 1.7 Site hazards are identified and risks are assessed and control measures are implemented
2 Facilitate safe ground support
  • 2.1 Appropriate precautions are observed when positioning vehicles or equipment close to aircraft
  • 2.2 Aircraft design features are taken into account whilst boarding, loading or handling aircraft
  • 2.3 Instructions from pilots and staff coordinating aircraft operations, organisational procedures and placards are followed during ground support operations
  • 2.4 Aircraft loading is conducted under pilot or flight crew member supervision and appropriate weight, balance and loading system are complied with
  • 2.5 Areas are designated and separated, in accordance with site features and specific operations being conducted
  • 2.6 Fitting of equipment to an aircraft is conducted under pilot supervision, in accordance with appropriate regulatory approvals
  • 2.7 Aircraft fuels, oils, and supplies are stored and handled, in accordance with regulatory requirements and organisational procedures
  • 2.8 Aircraft or equipment defects or hazards are reported to pilot and/or appropriate supervisor
  • 2.9 Appropriate aerodrome regulations are complied with
No information
No information
Replaces
State Code National Code Title Type
D3769 PUAFIR209B Work safely around aircraft Unit of competency
Replaced By
State Code National Code Title Type
OCR93 PUAFIR017 Work safely around aircraft Unit of competency