Unit of competency Outline

Date retreived
22/07/2026 10:37 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Make up tracks for window coverings

Make up tracks for window coverings

Unit of competency
National Code
MSFSF2020
State Code
OEL72
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/04/2023
Nominal Hours
24
Description
This unit describes the skills and knowledge required to cut, assemble and package tracking components and curtain hardware in preparation for onsite fitting. Workers with this competency follow established procedures in the soft furnishing industry. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1 Identify products, fittings and attachments to be used
  • 1.1 Determine track type, components and tools required from work documentation
  • 1.2 Identify task requirements, including those for quality and quantity
2 Prepare for work
  • 2.1 Identify and follow work health and safety requirements
  • 2.2 Select tools to meet task requirements and check they are safe and functional
  • 2.3 Select materials to meet task requirements and check they meet quality requirements
  • 2.4 Confirm cutting equipment setting and operation of safety cut-out and guards
  • 2.5 Plan work to conform to quality requirements, minimise time, and economically use materials
  • 2.5 Identify procedures for checking quality of work
3 Cut tracking to required length
  • 3.1 Operate cutting equipment in accordance with workplace procedures and work health and safety requirements
  • 3.2 Monitor cutting and confirm required quality is achieved
  • 3.3 Identify and report operational problems in accordance with workplace procedures
  • 3.4 Follow workplace procedures to minimise waste and collect and store re-usable materials
  • 3.5 Complete routine maintenance of cutting equipment in accordance with workplace procedures and manufacturer instructions
  • 3.6 Remove waste and clean work area in accordance with workplace procedures
4 Assemble and package tracking components
  • 4.1 Collect and assemble components to complete tracking, and complete checks for quality and quantity in accordance with workplace procedures
  • 4.2 Package and prepare components for distribution in accordance with workplace procedures
  • 4.3 Complete documentation in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WI625 MSFSF2010 Make up tracks for window coverings Unit of competency
State Code National Code Title Type
BIJ6 MSF20122 Certificate II in Furnishing Qualification