Unit of competency Outline

Date retreived
22/07/2026 6:39 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Make up tracks for window coverings

Make up tracks for window coverings

Unit of competency
National Code
MSFSF2010
State Code
WI625
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
24
Description
This unit of competency covers cutting, assembling and packaging tracking components and curtain hardware in preparation for on-site fitting.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify products, fittings and attachments to be used
  • 1.1 Type of tracks to be fitted and work order requirements are identified
  • 1.2 Attachments, required components and tools are identified from work instructions
  • 1.3 Quality and quantity requirements are identified
2 Prepare for work
  • 2.1 Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work
  • 2.2 Required tools and materials to complete the work are sourced, collected and checked for suitability
  • 2.3 Cutting equipment is checked for correct setting and operation of safety cut-out and guards
  • 2.4 Work is planned to conform to quality requirements, minimise time, and economically use materials
  • 2.5 Procedures are identified for checking the quality of the work
3 Cut tracking to required length
  • 3.1 Cutting equipment is operated in compliance with workplace procedures and WHS requirements
  • 3.2 Cutting is monitored to ensure quality of product
  • 3.3 Problems occurring during work operations are identified and reported following workplace procedures
  • 3.4 Waste quantities are minimised, and re-usable materials are collected and stored following workplace procedures
  • 3.5 Routine maintenance of the cutting equipment is carried out according to workplace and manufacturer instructions
  • 3.6 Waste is removed and work area is cleaned following workplace procedures
4 Assemble and package tracking components
  • 4.1 Components required to complete the tracking are collected, assembled and checked for quality and quantity
  • 4.2 Components are packaged following work requirements
  • 4.3 The completed package is secured, labelled and stored according to workplace procedures
  • 4.4 Appropriate documentation is completed
No information
No information
Replaces
State Code National Code Title Type
W8766 LMFSF2010B Make up tracks for window coverings Unit of competency
Replaced By
State Code National Code Title Type
OEL72 MSFSF2020 Make up tracks for window coverings Unit of competency
State Code National Code Title Type
J725 MSF20113 Certificate II in Furnishing Qualification
J734 MSF30613 Certificate III in Soft Furnishing Qualification