Unit of competency Outline

Date retreived
22/07/2026 2:59 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Finish and pack products

Finish and pack products

Unit of competency
National Code
FWPCOT2203
State Code
AXL93
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
2.00
Current Release Date
21/02/2018
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
089901 - Purchasing, Warehousing And Distribution
Original Release Date
05/10/2016
Nominal Hours
15
Description
This unit of competency specifies the outcomes required to set up and conduct the finishing process and pack products. The unit includes machining and manually or machine coating products.The unit applies to timber manufacturing and production workers that coat and package products to complete finishing operations in a forest products factory setting.No licensing or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Set up production processes
  • 1.1 Identify products, processes and production requirements in line with work order and site procedures.
  • 1.2 Prepare to work safely according to workplace work health and safety (WHS) requirements.
  • 1.3 Inspect equipment, tools and materials for operational effectiveness in line with manufacturer recommendations and site procedures.
  • 1.4 Conduct test run, by machining sample material in line with set-up processes and site requirements.
  • 1.5 Inspect machined product for faults and alter setup to rectify identified problems.
2. Conduct finishing operations
  • 2.1 Measure and mark material for processing in line with work order and in consultation with appropriate personnel.
  • 2.2 Machine material and identify, remove and repair or dispose of defects in line with site procedures.
  • 2.3 Identify, investigate and resolve equipment faults and routine problems, as required.
  • 2.4 Clear work area and dispose of waste material in line with relevant environmental policies and procedures.
3. Coat products
  • 3.1 Identify and plan coating requirements and select coat in line with site procedures.
  • 3.2 Prepare coating area to provide suitable clean area that minimises surface defects during drying, in line with site procedures.
  • 3.3 Open, decant and mix coat in line with manufacturer recommendations and safe work procedure.
  • 3.4 Apply coat according to planned method and sequence in line with manufacturer recommendations and site standards.
  • 3.5 Assess coat regularly to identify and remove faults in line with site standards.
  • 3.6 Dispose of products with coat faults in line with site procedures and environmental requirements.
  • 3.7 Clear work area, store materials and dispose of chemical waste according to site procedures and environmental protection requirements.
4. Pack finished products
  • 4.1 Check finished products for faults and conformance, and segregate and store in line with workplace procedure and environmental requirements.
  • 4.2 Interpret packing requirements from work order and other relevant documentation.
  • 4.3 Pack finished products in line with site procedures and work orders, using suitable packing materials.
  • 4.4 Record packaged products in line with site procedures.
  • 4.5 Record and report finishing process to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D5883 FPICOT2203B Finish products Unit of competency