Unit of competency Outline
Date retreived
22/07/2026 3:38 AM AWST
22/07/2026 3:38 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Automatically produce basic screen prints
Automatically produce basic screen prints
Unit of competency
National Code
ICPSCP2750
ICPSCP2750
State Code
OBQ54
OBQ54
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
30
Description
This unit describes the skills and knowledge required to safely produce one or two colour screen prints on an automatic printing machine.It applies to individuals working under direct supervision in the printing and graphic arts industry. They perform mainly routine tasks such as monitoring, adjusting and cleaning equipment, selecting products and ensuring set processes are followed in the use of an automatic printing machine.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
- 1.1 Check substrate against job specifications and report and rectify any irregularities or inconsistencies
- 1.2 Adjust substrate position and stencil registration
- 1.3 Apply ink to screen in quantity required for screen size
- 1.4 Check ink against job specifications and adjust as required
- 1.5 Set and adjust feeder according to substrate requirements
2. Prepare for production run
- 2.1 Run off proof print and check for quality and other technical requirements according to job specifications, and make adjustments as required
- 2.2 Seek approval to commence production from designated personnel
- 2.3 Set up belt speed and energy and adjust printing speeds according to job requirements
3. Run job and monitor print quality
- 3.1 Operate equipment to produce screen print according to job specifications and adjust production speed as required
- 3.2 Evaluate print quality and sheet feeder throughout production run and adjust as required
- 3.3 Monitor and adjust curing and drying according to manufacturer specifications
- 3.4 Identify and report problems in machine operation according to enterprise procedures
4. Handle production output
- 4.1 Confirm drying and curing of output prior to handling
- 4.2 Check job status and progress against job specifications and make adjustments as required
5. Shut down machine
- 5.1 Remove and clean excess ink, screens, squeegees and flood coaters according to work health and safety (WHS) requirements and manufacturer specifications
- 5.2 Remove solid and liquid waste from operating area and recycle and dispose of, as required, according to regulatory requirements and enterprise procedures
- 5.3 Clean equipment and surrounding areas according to manufacturer specifications and enterprise procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AUO91 | ICPSCP275 | Automatically produce basic screen prints | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BFB8 | ICP31220 | Certificate III in Printing | Qualification |
| BFC3 | ICP20120 | Certificate II in Printing and Graphic Arts | Qualification |