Unit of competency Outline

Date retreived
22/07/2026 12:56 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce digital patterns for 2D manufactured textile products

Produce digital patterns for 2D manufactured textile products

Unit of competency
National Code
MSTTF3010
State Code
OEZ29
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
22/12/2022
View on TGA
State Implementation and Classification
Approved Date
03/07/2023
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
03/07/2023
Nominal Hours
20
Description
This unit describes the skills and knowledge required to use computer hardware and software to develop 2D patterns for the production of complex shapes in manufactured textile products. It requires the ability to create drawings, complete computerised cutting of shapes, use a plotting table, and calculate material requirements and costing.This unit applies to individuals working in accordance with pre-determined specifications and established procedures. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare to produce 2D patterns
  • 1.1 Read and interpret preliminary drawings and other information that describes job specifications
  • 1.2 Determine any missing dimensions or other unknown features of the proposed product through consultation with others and take action to obtain required details
  • 1.3 Identify appropriate computer applications and enter required information or transfer from other sources to initiate design or production processes
2. Mark out and cut out shapes
  • 2.1 Construct 2D drawings based on information using appropriate software applications in accordance with their operating requirements
  • 2.2 Make appropriate adjustment for shrinkage and other required allowances
  • 2.3 Mark out and cut shapes based on job information using a plotting table and appropriate features of software applications
  • 2.4 Check finished work is accurate and conforms with specifications
3. Perform calculations
  • 3.1 Use software applications to make accurate calculations for materials and product costings
  • 3.2 Save data, drawings and other outputs using established workplace file and documentation formats
4. Save document and communicate data
  • 4.1 Store other work-related information in accordance with workplace procedures
  • 4.2 Pass on data and associated information to personnel responsible for further action
  • 4.3 Follow procedures for exiting applications and computer shutdown
No information
No information
Replaces
State Code National Code Title Type
BAU63 MSTTF2007 Produce patterns for 2-D products Unit of competency
State Code National Code Title Type
BIY9 MST30222 Certificate III in Manufactured Textile Products Qualification