Unit of competency Outline

Date retreived
22/07/2026 8:20 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Water test vessels

Water test vessels

Unit of competency
National Code
AURRTA006
State Code
AXB61
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
031703 - Marine Construction
Original Release Date
13/07/2016
Nominal Hours
16
Description
This unit describes the performance outcomes required to water test a vessel in order to meet specific customer performance specifications and ensure compliance with statutory regulations. It involves preparing for the task, conducting a vessel safety inspection, water testing the vessel on a waterway, and completing work processes and documentation, including any associated recommendations for further action.It applies to those working in the marine service and repair industry.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Prepare to water test vessel
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Water testing procedures and information are accessed and interpreted
  • 1.3 Water testing options are analysed and those most appropriate to the circumstances are selected
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
2. Conduct safety inspection
  • 2.1 Vessel safety equipment is audited
  • 2.2 Vessel systems and components are checked for seaworthiness, and compliance with manufacturer specifications and applicable state and territory regulations
  • 2.3 Vessel is checked for safety using testing equipment, as required
  • 2.4 Systems and components that fail the safety test are recorded, and supervisor and owner are notified
3. Undertake water testing activities
  • 3.1 Engine performance is tested according to manufacturer specifications, workplace procedures, safety requirements, and state and territory marine safety laws
  • 3.2 Propulsion unit is tested according to manufacturer specifications, workplace procedures, safety requirements, and state and territory marine safety laws
  • 3.3 Hull and hull fittings are tested according to manufacturer specifications, workplace procedures, safety requirements, and state and territory marine safety laws
  • 3.4 Vessel systems that fail water testing are reported according to workplace procedures, and include recommendations for required repairs or adjustments
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and vessel is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF320 AURRTA3006 Water test a vessel Unit of competency