Unit of competency Outline

Date retreived
22/07/2026 2:40 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up, operate and maintain end matching operations

Set up, operate and maintain end matching operations

Unit of competency
National Code
FWPCOT3209
State Code
AXL53
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
21/02/2018
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/10/2016
Nominal Hours
30
Description
This unit of competency describes the outcomes required to coordinate operational logistics for end matching activities which includes planning schedules for operators, setting up equipment for production runs, resolving processing problems and coordinating equipment shut-down and maintenance. The unit applies to timber process operators that co-ordinate end matching activities in a forest products factory setting.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan production parameters
  • 1.1 Interpret production orders for grades, quantities of timber requiring rework, cross sections, end use and plan end matching operations.
  • 1.2 Develop end matching schedules to ensure optimum production outcomes and communicate to operators in line with organisational procedures.
2. Set up and monitor end matching operation
  • 2.1 Check equipment for operational effectiveness and adjust set up to meet production requirements.
  • 2.2 Select, check, prepare and install cutters to suit end profile and timber cross section.
  • 2.3 Set feed rates, guides and conveyors to suit timber cross section and characteristics.
  • 2.4 Cut trial joints and check end profiles against specifications.
  • 2.5 Join trial boards and test for strength and appearance.
  • 2.6 Accept or reject trialled material and dispose of in line with environmental protection practices.
  • 2.7 Resolve any machining problems, make final adjustments and start the end matching process.
  • 2.8 Monitor end matching processes; identify and resolve processing and equipment faults.
  • 2.9 Record and report production outcomes to appropriate personnel.
3. Coordinate shut-down and maintenance
  • 3.1 Coordinate equipment shutdown with operators in line with organisational safety procedures.
  • 3.2 Assist maintenance personnel to identify and resolve equipment faults.
  • 3.3 Plan and coordinate routine maintenance of end matching equipment in line with organisational procedures and maintenance schedules.
No information
No information
Replaces
State Code National Code Title Type
D5920 FPICOT3209B Set up, operate and maintain end matching operations Unit of competency
Replaced By
State Code National Code Title Type
OBM54 FWPCOT3275 Set up, operate and maintain end matching machines Unit of competency