Qualification Outline
22/07/2026 5:15 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Timber Manufactured Products
Certificate III in Timber Manufactured Products
FWP30516
BAM0
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 5.00 | 12/02/2021 | Current | Approved |
| 4.00 | 04/12/2020 | Replaced | Approved |
| 3.00 | 31/01/2020 | Replaced | Approved |
| 2.00 | 18/12/2018 | Replaced | Approved |
| 1.00 | 13/05/2016 | Replaced | Approved |
Description
This qualification is designed for job roles in the timber manufactured products sector of the forest and forest products industry.
Job roles
This qualification has five employment pathways for typical operational environments of timber manufactured products. These are:
Press Operator
Jig Setter
Machine Operator (e.g. Finger Jointing, Moulding, Planing)
Saw Operator
Timber Manufactured Products Technician
Licensing, legislative, regulatory, or certification requirements may apply to units in this qualification in some states and territories at the time of publication and may differ according to jurisdiction.
Some imported units in the elective bank may be subject to licensing, legislative, regulatory, or certification requirements. These units must be implemented in line with the licensing requirements outlined in the unit’s parent Training Package.
Schedule
Packaging Rules
To achieve this qualification, competency must be demonstrated in:- Thirteen (13) units of competency:
- six (6) core units plus
- seven (7) elective units.
Elective units must ensure the integrity of the qualification’s Australian Qualification Framework (AQF) alignment and contribute to a valid, industry-supported vocational outcome. The electives are to be chosen as follows:
- three (3) units from Group A
- four (4) units from Group A and/or Group B, the total of which can include up to two (2) units recommended for packaging at Certificate II, III or IV level from this or any other endorsed Training Package or state/territory accredited course.
Elective units must be relevant to work undertaken in the timber manufactured products sector of the industry.
Elective Units
An asterisk (*) next to the unit code on TGA indicates that there are prerequisite requirements which must be met when packaging the qualification. Please refer to the Prerequisite requirements table for details.
1. Core Units
All six (6) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AXM11 | FWPCOR2202 | Communicate and interact effectively in the workplace | 20 | Unit of competency |
| AXM05 | FWPCOR3202 | Conduct quality and product care procedures | 40 | Unit of competency |
| AUI54 | BSBFLM312 | Contribute to team effectiveness | 30 | Unit of competency |
| AXM04 | FWPCOR3201 | Implement safety, health and environment policies and procedures | 60 | Unit of competency |
| AXM02 | FWPCOR3204 | Visually assess materials | 17 | Unit of competency |
| AXM09 | FWPCOR2201 | Work effectively in the forest and forest products industry | 20 | Unit of competency |
2. Group A Elective Units
At least three (3) units must be chosen.
Please refer to the packaging rules for the full details of available options.
3. Group B Elective Units
Up to four (4) units may be chosen.
Please refer to the packaging rules for the full details of available options.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| J469 | FPI30511 | Certificate III in Timber Manufactured Products | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BJC1 | FWP30322 | Certificate III in Timber and Wood Products Operations | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships