Unit of competency Outline

Date retreived
22/07/2026 9:47 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct quality and product care procedures

Conduct quality and product care procedures

Unit of competency
National Code
FWPCOR3202
State Code
AXM05
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
080317 - Quality Management
Original Release Date
05/10/2016
Nominal Hours
40
Description
The unit of competency describes the outcomes required to monitor the quality of output, following quality and product care procedures in a variety of work settings, including a forest environment, saw mill, wood chip mill, veneer mill, board/plywood mill, timber treatment plants, downstream processing of timber, forest products factory, forest products sales and service, horticultural, domestic, local council, emergency services environment.This unit is relevant for a broad range of job roles across a range of industry sectors. The product referred to in this unit may be trees, logs, seed, planting stock, timber, panels or board.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to apply quality and product care procedures.
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Identify quality system procedures to be applied.
  • 1.3 Visually inspect products before processing in line with work health and safety (WHS) policies and procedures.
  • 1.4 Determine product specifications.
2. Monitor and control care of products.
  • 2.1 Plan product recovery to optimise the resource value and minimise waste.
  • 2.2 Plan potential of materials to provide the highest value added return.
  • 2.3 Assess and report on species, timber structure, features and characteristics as required by the enterprise.
  • 2.4 Grade materials and direct to best end use in line with industry standards as required by the enterprise.
  • 2.5 Regularly maintain and adjust machinery and equipment to minimise waste and damage.
  • 2.6 Assess and rectify problems as they occur to avoid further loss of product.
3. Monitor and control quality of output.
  • 3.1 Assess products against quality and customer specification requirements.
  • 3.2 Prepare products for despatch in a manner that prevents or minimises damage.
  • 3.3 Supply customer with finished products in line with work order and workplace procedures.
  • 3.4 Record and report on quality and product care procedures in line with workplace procedures.
No information
No information
Replaces
State Code National Code Title Type
D5873 FPICOR3202B Conduct quality and product care procedures Unit of competency
Replaced By
State Code National Code Title Type
ODS85 FWPCOT3322 Apply quality and product care procedures in forest and wood products operations Unit of competency