Unit of competency Outline

Date retreived
23/07/2026 12:23 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Replace saw blades, knives and guides

Replace saw blades, knives and guides

Unit of competency
National Code
FWPCOT3280
State Code
OBM49
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
31/01/2020
View on TGA
State Implementation and Classification
Approved Date
29/05/2020
Field of Education
030715 - Precision Metalworking
Original Release Date
29/05/2020
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge required to remove blunt or damaged saw blades, knives and guides from circular saws, band saws, chippers and canters, and install reconditioned cutting components. The unit applies to individuals who replace saw blades, knives and guides in saws, chippers and canters in a timber processing or manufacturing facility.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for replacement
  • 1.1 Review work order to determine job requirements and, where required, seek clarification from appropriate personnel
  • 1.2 Review workplace health and safety procedures, including the use of personal protective equipment, equipment lock-out and safe manual handling techniques
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with replacing saw blades, knives, and guides
  • 1.4 Identify workplace environmental protection procedures for minimising and disposing of waste material, cleaning tools and equipment, and maximising energy efficiency
  • 1.5 Select appropriate repair and maintenance tools and equipment, including lifting equipment if required, and check for operational effectiveness
  • 1.6 Select replacement saw blades, knives and guides according to manufacturer recommendations
  • 1.7 Transport saw blades, knives and guides for replacement to designated machines, using mechanical lifting aids as required
2. Replace saws, blades and guides
  • 2.1 Lock out machine and equipment according to workplace procedures, and remove mechanical and safety components to provide access to saw blades, knives and guides without damaging components
  • 2.2 Store removed components temporarily in a safe location
  • 2.3 Remove and replace saw blades, knives and guides according to manufacturer recommendations
  • 2.4 Re-attach and secure mechanical and safety components according to manufacturer recommendations
  • 2.5 Check serviced machine and equipment for correct alignment, position and overall free operational performance
  • 2.6 Dispose of used saw blades, knives and guides according to environmental protection practices, or transfer for reconditioning
  • 2.7 Record and report processing problems and equipment faults to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
AXL50 FWPCOT3212 Replace saws, blades and guides Unit of competency