Qualification Outline
23/07/2026 6:43 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Saw Technology
Certificate III in Saw Technology
FWP31021
BHL2
Current
Approved
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 2.00 | 25/01/2023 | Current | Approved |
| 1.00 | 28/01/2022 | Replaced | Approved |
Description
This qualification reflects the job role of Saw Technicians who service, maintain and align saw blades, knives and guides for timber sawmilling machines and other applications. Saw Technicians may also inspect, test, maintain and troubleshoot mechanical components on sawing machine centres to achieve sawing production rates and product tolerances.
The elective groups and units of competency within this qualification can provide Saw Technicians with two pathway options. Saw Technicians can use the qualification to develop skills in performing general saw servicing operations or develop skills in saw maintenance engineering roles.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
Schedule
Packaging Rules
To achieve this qualification, competency must be demonstrated in:- Twenty-six (26) units of competency:
- seven (7) core units plus
- nineteen (19) elective units.
Elective units must ensure the integrity of the alignment between the qualification and the Australian Qualifications Framework (AQF) and contribute to a valid, industry-supported vocational outcome. The electives are to be chosen as follows:
- all four (4) units must be selected from either Group A or Group B
- a minimum of eight (8) units must be selected from Group C
- remaining units can be selected from Group C and/or Group D and can include up to two (2) units from any currently endorsed Training Package or accredited course.
Elective units must be relevant to work undertaken in the sawmilling and processing sector of the industry.
1. Core Units
All seven (7) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| OBM39 | FWPCOT3290 | Apply knowledge of timber properties, sawmill operations and sawmilling equipment | 45 | Unit of competency |
| OBM07 | FWPSAW3251 | Apply principles of blade design to sawing procedures | 30 | Unit of competency |
| OBM50 | FWPCOT3279 | Assess and maintain saw technology tools | 25 | Unit of competency |
| OBM44 | FWPCOT3286 | Identify levelling and tensioning requirements for saw blades | 35 | Unit of competency |
| OBM12 | FWPSAW3247 | Replace tungsten tips | 30 | Unit of competency |
| OBM46 | FWPCOT3283 | Sharpen and position blades or knives in chipper, canter and reducer | 20 | Unit of competency |
| OCD94 | BSBTWK201 | Work effectively with others | 35 | Unit of competency |
2. Group A General Electives (Service Operations)
All four (4) units from either Group A or Group B must be selected.
Please refer to the packaging rules for full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| ODS58 | FWPCOR3205 | Apply safety, health and environmental requirements in forest and wood products operations | 60 | Unit of competency |
| ODS55 | FWPCOR2208 | Communicate and interact effectively in the forest and wood products industry | 35 | Unit of competency |
| OEU88 | MEM30032 | Produce basic engineering drawings | 80 | Unit of competency |
| ODS53 | FWPCOR2206 | Work effectively in the forest and wood products industry | 20 | Unit of competency |
3. Group B General Electives (Maintenance Engineering)
All four (4) units from either Group A or Group B must be selected.
Please refer to the packaging rules for full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| OAV96 | MEM09002 | Interpret technical drawing | 36 | Unit of competency |
| OAV04 | MEM16006 | Organise and communicate information | 18 | Unit of competency |
| OAV19 | MEM14006 | Plan work activities | 32 | Unit of competency |
| OAV23 | MEM13015 | Work safely and effectively in manufacturing and engineering | 32 | Unit of competency |
4. Group C Elective Units – Saw Technology (Service Operations)
At least eight (8) units must be selected.
Please refer to the packaging rules for full details of available options.
5. Group D Elective Units – Saw Technology (Maintenance Engineering)
Up to seven (7) units may be selected.
Please refer to the packaging rules for full details of available options.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| BFA0 | FWP31019 | Certificate III in Saw Technology | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships