Unit of competency Outline

Date retreived
22/07/2026 9:39 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Identify levelling and tensioning requirements for saw blades

Identify levelling and tensioning requirements for saw blades

Unit of competency
National Code
FWPCOT3286
State Code
OBM44
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
31/01/2020
View on TGA
State Implementation and Classification
Approved Date
29/05/2020
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2020
Nominal Hours
35
Description
This unit of competency describes the skills and knowledge required to identify the levelling and tensioning requirements for circular, narrow and wide band saw blades that have been removed from the sawing machine. The unit applies to individuals who identify levelling and tensioning requirements for saw blades used in sawmilling operations.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to identify levelling and tensioning requirements
  • 1.1 Review work order to determine job requirements and, where required, seek clarification from appropriate personnel
  • 1.2 Review workplace health and safety procedures, including the use of personal protective equipment, equipment lock-out and safe manual handling techniques
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with handling and inspecting saw blades
  • 1.4 Identify and implement workplace procedures for minimising waste material and maximising energy efficiency
2. Inspect blade
  • 2.1 Handle saw blade to avoid damaging teeth
  • 2.2 Clear foreign material from saw blade surfaces for inspection
  • 2.3 Inspect saw blade and use correct terminology to identify defects
  • 2.4 Declare saw unserviceable where hazardous defects are found
  • 2.5 Segregate and dispose of unserviceable saws according to workplace procedures and environmental protection practices
3. Determine levelling and tensioning requirements
  • 3.1 Identify levelling and tensioning requirements for the saw blade
  • 3.2 Identify method and tools and equipment required for levelling and tensioning saw blade
  • 3.3 Verify requirements and appropriate methods for levelling and tensioning with supervisor as required
  • 3.4 Record inspection results according to workplace requirements
No information
No information
No information