Unit of competency Outline

Date retreived
22/07/2026 12:53 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate CNC equipment for grinding, tensioning and levelling saw blades

Operate CNC equipment for grinding, tensioning and levelling saw blades

Unit of competency
National Code
FWPCOT3287
State Code
OBM42
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
31/01/2020
View on TGA
State Implementation and Classification
Approved Date
29/05/2020
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2020
Nominal Hours
45
Description
This unit of competency describes the skills and knowledge required to set up and operate computer numerical control (CNC) equipment for grinding, tensioning and levelling saw blades. The unit applies to individuals who operate CNC equipment for grinding, levelling and tensioning saw blades in a saw technician workshop or sawmill for sawmilling operations. All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1 Review work order to determine job requirements and, where required, seek clarification from appropriate personnel
  • 1.2 Review workplace health and safety requirements, including the use of personal protective equipment, equipment lock-out and safe manual handling techniques
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with operating CNC equipment
  • 1.4 Identify and implement workplace procedures for minimising waste material and maximising energy efficiency
  • 1.5 Obtain tools, equipment and measuring devices needed for the work according to established procedures, and check for correct operation and safety
  • 1.6 Select and inspect saw blades and determine suitability for machining
2. Set up CNC equipment
  • 2.1 Set CNC program to job requirements
  • 2.2 Check safety equipment, including emergency stops, gauges, guards and controls
  • 2.3 Set and adjust equipment according to job requirements and manufacturer instructions
  • 2.4 Check CNC equipment, cutting tools and jigs for safe and effective operation
  • 2.5 Conduct trial runs to check equipment operation, test and prove CNC program and assess quality of finished work
  • 2.6 Make final adjustments to CNC programs and equipment according to workplace procedures
3. Operate CNC equipment
  • 3.1 Operate and monitor equipment to ensure product quality and output
  • 3.2 Identify and report problems with the required work to appropriate personnel
  • 3.3 Reuse, recycle or dispose of items that do not meet quality requirements
  • 3.4 Comply with any authorised changes in working procedures
4. Finalise operation and maintain equipment
  • 4.1 Clean work area and leave in a safe condition according to workplace procedures
  • 4.2 Perform routine maintenance according to workplace and manufacturer instructions
  • 4.3 Tag and report faulty and/or defective equipment
  • 4.4 Collect and store unused hardware according to workplace procedures
  • 4.5 Dispose of waste and scrap materials according to workplace procedures
  • 4.6 Check and replenish consumables
  • 4.7 Record and report production outcomes, equipment faults and maintenance requirements to appropriate personnel
No information
No information
No information
State Code National Code Title Type
BFA0 FWP31019 Certificate III in Saw Technology Qualification
BHL2 FWP31021 Certificate III in Saw Technology Qualification