Unit of competency Outline

Date retreived
23/07/2026 7:15 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Commission domestic and residential fire suppression sprinkler systems

Commission domestic and residential fire suppression sprinkler systems

Unit of competency
National Code
CPCPFS4011A
State Code
D7449
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
19/05/2011
View on TGA
State Implementation and Classification
Approved Date
21/06/2011
Field of Education
040327 - Plumbing
Original Release Date
21/06/2011
Nominal Hours
52
Description
This unit of competency specifies the outcomes required to test and commission domestic and residential fire suppression sprinkler systems in buildings up to four storeys in height.It covers preparation for the work, identification and confirmation of system specifications and requirements, physical testing and commissioning of the systems, and work finalisation processes including records and documentation.
Notes
Elements and Performance Criteria
1. Prepare for work.
  • 1.1. Drawings and specifications are obtained.
  • 1.2. Safety (OHS) requirements associated with commissioning domestic and residential fire suppression sprinkler systems, and workplace environmental requirements, are adhered to throughout the work.
  • 1.3. Quality assurance requirements are identified and adhered to in accordance with workplace requirements.
  • 1.4. Tasks are planned and sequenced in conjunction with others involved in or affected by the work.
  • 1.5. Tools, equipment and materials for commissioning domestic and residential fire suppression sprinkler systems, including personal protective equipment, are selected and checked for serviceability.
  • 1.6. Work area is prepared to support efficient commissioning process.
2. Identify system requirements.
  • 2.1. System design requirements are identified and confirmed from job specifications and in accordance with standards.
  • 2.2. Commissioning requirements for domestic and residential fire suppression sprinkler systems are identified in accordance with standards, authorities' requirements and job specifications.
3. Test and commission system.
  • 3.1. Sprinkler systems are checked to ensure type and installation conform to standards, job specifications, manufacturer recommendations and authorities' requirements.
  • 3.2. Operation of system is tested in accordance with job specifications, manufacturer recommendations and authorities' requirements and is adjusted as required.
  • 3.3. System is commissioned and maintained to ensure correct operation in accordance with standards, and manufacturer and job specifications.
4. Clean up work area.
  • 4.1. Work area is cleared and materials disposed of or recycled in accordance with state or territory statutory and regulatory authority legislation and workplace procedures.
  • 4.2. Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and workplace procedures.
  • 4.3. Information is accessed and documentation completed in accordance with workplace requirements.
No information
No information
Replaces
State Code National Code Title Type
W9677 CPCPFS4001A Commission domestic and residential fire suppression sprinkler systems Unit of competency
Replaced By
State Code National Code Title Type
WF978 CPCPFS4021A Commission domestic and residential fire suppression sprinkler systems Unit of competency
No information