Unit of competency Outline
Date retreived
23/07/2026 1:12 AM AWST
23/07/2026 1:12 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Install timber flooring to joists
Install timber flooring to joists
Unit of competency
National Code
MSFFL3088
MSFFL3088
State Code
OAJ39
OAJ39
TGA Status
Deleted
Deleted
DTWD Status
Deleted
Deleted
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040321 - Floor Coverings
Original Release Date
22/05/2019
Nominal Hours
35
Description
This unit describes the skills and knowledge required to plan, prepare, set out and install or repair internal timber flooring directly to joists and over sheet subfloors and external decking to joists in domestic and commercial settings. This unit applies to flooring technicians installing flooring in accordance with pre-determined work orders.There are no specific licensing requirements directly associated with this unit, however, some jurisdictions require the holder of this unit to be licensed or certified and users should check with the relevant authorities. Industry standards and codes of practice within Australia must also be applied. Access to construction sites requires certification of general induction training covered by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1. Determine job requirements
- 1.1 Follow standard operating procedures (SOPs)
- 1.2 Comply with work health and safety requirements at all times
- 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
- 1.4 Identify job requirements from plans, specifications, drawings, quality requirements and operational details
- 1.5 Confirm subfloor suitability for installation consistent with Australian Standards and manufacturer recommendations
2. Set out
- 2.1 Identify and implement signage and/or barricade requirements
- 2.2 Inspect subfloor and joists for flatness and structural integrity and correct as required in accordance with SOPs
- 2.3 Inspect timber flooring material and confirm species, grade, size and quantity against work orders
- 2.4 Moisture check timber using required equipment and confirm suitability of moisture content for site conditions as per pre-site inspection procedures
- 2.5 Set out and plan installation method in accordance with job requirements
- 2.6 Prepare materials in accordance with client specifications
3. Install timber flooring
- 3.1 Select appropriate flooring materials for the intended use according to specifications
- 3.2 Confirm floor measurements and flooring materials to ensure minimum waste and prepare for installation
- 3.3 Install flooring, as specified by the client, using suppliers recommended products ensuring product is installed and secured to manufacturer recommendations, industry and Australian Standards
- 3.4 Complete installed flooring in preparation for sanding and finishing
4. Complete housekeeping
- 4.1 Store and recycle unused materials in accordance with workplace procedures
- 4.2 Check, clean and store tools and equipment in accordance with workplace procedures
- 4.3 Clean work area and dispose of rubbish safely
- 4.4 Accurately complete required workplace documentation
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWS59 | MSFFL3051 | Install timber flooring to joists | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BED0 | MSF30818 | Certificate III in Flooring Technology | Qualification |