Unit of competency Outline

Date retreived
23/07/2026 7:37 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test fibre-composites materials and laminates

Test fibre-composites materials and laminates

Unit of competency
National Code
PMBTECH403
State Code
BAI03
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030305 - Materials Engineering
Original Release Date
05/08/2016
Nominal Hours
40
Description
This unit of competency covers the skills and knowledge required to test fibre reinforced plastics materials and laminates. It applies to testing of raw materials and products. Tests are typically done to check conformance with design and quality specifications or to compare specific characteristics of materials/products.This unit of competency applies to technicians or those in similar roles who are required to determine test specifications, prepare samples, perform tests and make recommendations based on the results.This unit of competency applies to a technician applying specialised theoretical and technical knowledge and well developed skills in situations that require autonomy, discretion and judgement. The person may work alone or as a member of a team or group and will work in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine test requirements
  • 1.1 Identify properties to be measured according to specification
  • 1.2 Select appropriate test methods according to specifications
  • 1.3 Select appropriate testing equipment according to standards and specifications
2 Perform raw material tests
  • 2.1 Prepare samples according to specification
  • 2.2 Perform tests in accordance with job specifications
  • 2.3 Record test results according to standard procedures
  • 2.4 Interpret test results and compare with manufacturer material data sheets
3 Perform moulded product tests
  • 3.1 Prepare samples according to specification
  • 3.2 Perform tests in accordance with job specifications
  • 3.3 Record test results according to standard procedures
  • 3.4 Interpret test result and compare against quality specification
4 Record and report test results
  • 4.1 Document tests to enterprise requirements
  • 4.2 Compare results against standards
  • 4.3 Make written recommendations based on test results
No information
No information
Replaces
State Code National Code Title Type
W7691 PMBTECH403B Test fibre-composites materials and laminates Unit of competency
Replaced By
State Code National Code Title Type
ODB60 PMBTECH403E Test thermoset composite laminates and materials Unit of competency