Unit of competency Outline

Date retreived
22/07/2026 6:07 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair and maintain vision system equipment

Repair and maintain vision system equipment

Unit of competency
National Code
CUAVSS313
State Code
ODF89
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
16/04/2021
View on TGA
State Implementation and Classification
Approved Date
26/11/2021
Field of Education
031317 - Electronic Equipment Servicing
Original Release Date
26/11/2021
Nominal Hours
55
Description
This unit describes the performance outcomes, skills and knowledge required to undertake basic repairs to and maintain vision systems used in the screen, media and entertainment industries.The unit applies to those who use some discretion and judgement and operate under broad supervision within an established framework of plans and workplace procedures.In some States and Territories of Australia, a restricted electrical licence is required to repair and maintain production equipment. Restricted electrical licences allow a person to carry out electrical work incidental to a trade. Incidental work may include fault-finding on equipment or changing like for like equipment by disconnecting and reconnecting the fixed wiring. It does not include any other changes to the fixed wiring.Testing and tagging of electrical equipment must be carried out by a person with the relevant certificate of competency in accordance with the performance specifications of:Australian Standard 3760: 200 In-service safety inspection and testing of electrical equipmentAustralian Standard 3002: 1985 Electrical installations - shows and carnivals.In some States and Territories a licensed electrician would be required to undertake the tasks outlined in Element 2.Users are advised to check with the relevant licensing authority for requirements.
Notes
Elements and Performance Criteria
1. Undertake maintenance tasks
  • 1.1 Restore vision system equipment on location through maintenance work where required
  • 1.2 Clean and maintain equipment, cables and accessories according to organisational procedures and maintenance instructions
  • 1.3 Conduct equipment safety checks according to manufacturer instructions and in compliance with industry and Australian standards
  • 1.4 Check accuracy of equipment records using required maintenance documentation
2. Undertake repair tasks
  • 2.1 Recognise faults and safely shut down equipment where required
  • 2.2 Isolate fault to specific equipment or parts of equipment using fault detection procedures
  • 2.3 Determine repair requirements and make simple repairs according to level of own responsibility and label faulty equipment that cannot be repaired
  • 2.4 Label faulty equipment and refer complex repairs to technical specialists or licensed personnel
3. Comply with safety, legislative and organisational requirements
  • 3.1 Undertake simple modifications to equipment, ensuring current safety measures and deadlines are met
  • 3.2 Complete documentation according to organisational procedures and distribute to required personnel
  • 3.3 Confirm compliance with legislation when reviewing repair and maintenance activities
No information
No information
Replaces
State Code National Code Title Type
WI233 CUAVSS303 Repair and maintain vision system equipment Unit of competency