Unit of competency Outline

Date retreived
22/07/2026 2:57 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair veneer mechanically

Repair veneer mechanically

Unit of competency
National Code
FWPWPP2204
State Code
AXJ48
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030111 - Wood MacHining And Turning
Original Release Date
05/10/2016
Nominal Hours
10
Description
This unit of competency describes the outcomes required to assess and patch single thickness veneer mechanically to an acceptable level for continued use.The unit applies to production workers who repair veneer mechanically in a forest and wood products factory setting.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for repair
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Select appropriate personal protective equipment and check for operational effectiveness.
  • 1.3 Obtain type and quantity of material to be repaired from the veneer production process.
  • 1.4 Select patch strips in line with work order.
2. Patch veneer
  • 2.1 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices.
  • 2.2 Complete pre start-up equipment checks to ensure operational effectiveness.
  • 2.3 Set equipment controls and coordinate veneer flow with other operators to ensure minimal downtime.
  • 2.4 Inspect veneer defects, cut patch strips minimising wastage and feed into machine.
  • 2.5 Position veneer sheets to accept patch, and process.
  • 2.6 Position out-feed bins or trays to collect repaired veneer and clear regularly.
  • 2.7 Patch manually where mechanical process is not possible.
3. Redistribute material
  • 3.1 Grade patched veneer in line with organisational procedures and industry standards.
  • 3.2 Direct material to storage or processing operations in line with organisational procedures.
  • 3.3 Dispose of irreparable material and excess patch strips in line with environmental protection practices.
  • 3.4 Clean work area and store unused patch strips in line with organisational safety procedures.
  • 3.5 Record and report production outcomes and equipment faults to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D6108 FPIWPP2204B Repair veneer mechanically Unit of competency