Unit of competency Outline

Date retreived
22/07/2026 3:08 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Paint vehicle chassis and panels

Paint vehicle chassis and panels

Unit of competency
National Code
AUMGTY001
State Code
WH981
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
11/03/2014
Nominal Hours
28
Description
This unit describes the performance outcomes required to prepare and apply paint to produce a quality finish on vehicle chassis and panels.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a production worker level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for painting
  • 1.1 Paints and materials are identified and prepared according to workplace procedures
  • 1.2 Panels are masked off to ensure surrounding areas are protected from overspray
  • 1.3 Spraying equipment is selected and inspected, and faulty equipment identified, tagged and reported to appropriate personnel
  • 1.4 Paint colours are matched according to job specifications and vehicle paint code
2. Operate spraying equipment
  • 2.1 Spray painting guns are checked and adjusted for spray pattern, fan width and paint flow
  • 2.2 Spray painting booths are inspected for correct operation and adjusted if required
3. Apply paint
  • 3.1 Primers and paint are applied to ensure interior and exterior surfaces are coated
  • 3.2 Paint is applied according to manufacturer’s recommended thickness, lustre and surface finish
  • 3.3 Paint coatings are monitored for surface blemishes
  • 3.4 Paint viscosity is monitored and adjusted to ensure compliance with paint manufacturer specifications
4. Inspect painted surfaces
  • 4.1 Painted surfaces are visually inspected and faults identified
  • 4.2 Painted surfaces with paint faults are redirected for rework and appropriate personnel are notified
5. Complete work processes
  • 5.1 Spraying equipment is cleaned and inspected according to workplace procedures
  • 5.2 Work areas are cleaned, and unused materials stored
  • 5.3 Waste materials are removed and disposed of according to workplace environmental procedures
  • 5.4 Workplace job sheets or production schedules are completed
No information
No information
Replaces
State Code National Code Title Type
WE181 AUMGTY3001 Paint chassis or panels Unit of competency