Unit of competency Outline

Date retreived
22/07/2026 4:00 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect damage and develop scope of work

Inspect damage and develop scope of work

Unit of competency
National Code
FNSIGN404
State Code
AUR76
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
081103 - Insurance And Actuarial Studies
Original Release Date
16/09/2015
Nominal Hours
120
Description
This unit describes the skills and knowledge required to inspect a vehicle or property for damage and recommend action for reinstatement of the vehicle or property. It applies to individuals who may use specialised techniques to complete their work within organisations of various sizes and across a range of customer bases.Work functions in the occupational areas where this unit may be used are subject to regulatory requirements. Refer to the FNS Implementation Guide Companion Volume or the relevant regulator for specific guidance on requirements.
Notes
Elements and Performance Criteria
1. Inspect vehicle or property to determine cause and extent of damage
  • 1.1 Carry out inspection according to industry standards, regulations and legislative requirements
  • 1.2 Obtain permission to partly dismantle vehicle or property to permit accurate inspection of damage, if required
  • 1.3 Prepare written damage inspection report with sufficient information to enable preparation of repair quote, including repair option
  • 1.4 Ensure damage inspection report identifies claimable damage and is appropriate to type of damage sustained
  • 1.5 Collect all necessary evidence and material to support inspection report
  • 1.6 Complete inspection safely and without causing damage to any workplace property, or to vehicle or property
2. Determine preferred method or strategy for restoration or repair
  • 2.1 Evaluate possible options for restoration or repair
  • 2.2 Identify and recommend repair methods that conform to vehicle manufacturer or building regulations, and insurance organisation, enterprise and statutory guidelines
  • 2.3 Consider client wishes, cost, organisational policy and legislation
  • 2.4 Select best option for implementation
3. Prepare scope of work
  • 3.1 Identify claimable damage
  • 3.2 Identify need for specialist services
  • 3.3 Prepare scope of work according to organisational policy and procedures, legislation and industry code of practice
No information
No information
Replaces
State Code National Code Title Type
D4205 FNSIGN404A Inspect damage and develop scope of work Unit of competency
State Code National Code Title Type
BGX8 FNS51420 Diploma of Loss Adjusting Qualification
AWF7 FNS51415 Diploma of Loss Adjusting Qualification