Unit of competency Outline

Date retreived
22/07/2026 12:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and replace mechanical units during vehicle repair

Remove and replace mechanical units during vehicle repair

Unit of competency
National Code
AURVTN006
State Code
AWZ92
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to remove and replace mechanical units and assemblies to facilitate vehicle body repair activities. It involves preparing for the task, selecting and using specialist tools and equipment, removing and replacing mechanical units according to original equipment manufacturer (OEM) procedures and workplace procedures, and completing workplace processes and documentation.It applies to those working in the automotive body service and repair industry.Assistance from licensed persons must be sought in relation to air conditioning, liquefied petroleum gas (LPG), or other alternative fuel systems and components.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove and replace mechanical units
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Removal and replacement specifications are sourced and interpreted from OEM and workplace procedures
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools, equipment and materials are selected and checked for serviceability
  • 1.5 Vehicle and work area are prepared according to workplace procedures
  • 1.6 Work is planned to identify methods, minimise waste and prevent damage to vehicle
2. Carry out removal and replacement activities
  • 2.1 Mechanical units and assemblies are removed and replaced using approved procedures, hand tools and equipment and according to safety and environmental requirements
  • 2.2 Assistance from licensed persons is sought when removing and replacing air conditioning, LPG, or other alternative fuel systems and components
  • 2.3 Removal and replacement activities are completed according to OEM specifications and workplace procedures, and without causing damage to vehicle or components
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF489 AURVTN2006 Remove and replace mechanical units and assemblies Unit of competency