Unit of competency Outline

Date retreived
23/07/2026 5:34 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble bicycles

Assemble bicycles

Unit of competency
National Code
AURBTA103
State Code
OCK09
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
31/03/2021
Nominal Hours
30
Description
This unit describes the skills and knowledge required to assemble bicycles from a semi-assembled state. The unit involves preparing for the work, selecting and using specialist tools and equipment, selecting bicycle components, assembling bicycle frames, fitting, adjusting and testing bicycle components and accessories, and completing workplace processes and documentation.The unit applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to assemble bicycle
  • 1.1 Determine job requirements from workplace instructions
  • 1.2 Access and interpret bicycle manufacturer assembly specifications and the Australian Competition and Consumer Commission (ACCC) product safety standards relating to bicycles
  • 1.3 Identify hazards associated with the work and manage risks
  • 1.4 Select and check assembly tools and equipment, including personal protective equipment (PPE), for serviceability
  • 1.5 Prepare work area and plan work to minimise waste and use time efficiently
2. Select components
  • 2.1 Select components according to job specifications
  • 2.2 Remove components from packaging and inspect for quality
  • 2.3 List and report components identified as damaged or faulty to required personnel according to workplace procedures
3. Fit, test and adjust components
  • 3.1 Fit components to bicycle frame according to assembly plan, manufacturer specifications, and safety and environmental requirements, without causing damage to components or systems
  • 3.2 Lubricate components and adjust torque and tensions according to manufacturer assembly specifications
  • 3.3 Inspect and test assembled bicycle for required tension of components and operation, and adjust as required according to workplace procedures
  • 3.4 Check assembly to ensure it complies with ACCC product safety standards
4. Complete work processes
  • 4.1 Conduct final inspection according to workplace procedures and confirm bicycle is ready for use
  • 4.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 4.3 Complete documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AXE54 AURBTA003 Assemble bicycles Unit of competency