Unit of competency Outline

Date retreived
23/07/2026 4:48 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble bicycles

Assemble bicycles

Unit of competency
National Code
AURBTA003
State Code
AXE54
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to assemble bicycles from a semi-assembled state. It involves preparing for the work, selecting and using specialist tools and equipment, selecting bicycle components, assembling bicycle frames, fitting, adjusting and testing bicycle components and accessories, and completing workplace processes and documentation.It applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to assemble bicycle
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Bicycle manufacturer assembly specifications and the Australian Competition and Consumer Commission (ACCC) product safety standards relating to bicycles are accessed and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Assembly tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.5 Work area is prepared and work is planned to minimise waste and use time efficiently
2. Select components
  • 2.1 Components are selected according to job specifications
  • 2.2 Components are removed from packaging and inspected for quality
  • 2.3 Components identified as damaged or faulty are listed and reported to appropriate personnel according to workplace procedures
3. Fit, test and adjust components
  • 3.1 Components are fitted to bicycle frame according to assembly plan, manufacturer specifications, and safety and environmental requirements, and without causing damage to components or systems
  • 3.2 Components are lubricated and torque and tensions are adjusted according to manufacturer assembly specifications
  • 3.3 Assembled bicycle is inspected and tested for correct tension of components and operation, and adjusted as required according to workplace procedures
  • 3.4 Assembly is checked to ensure it complies with ACCC product safety standards
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF043 AURBTA2003 Assemble bicycles Unit of competency
Replaced By
State Code National Code Title Type
OCK09 AURBTA103 Assemble bicycles Unit of competency