Unit of competency Outline

Date retreived
22/07/2026 12:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate and monitor machines (basic)

Operate and monitor machines (basic)

Unit of competency
National Code
ICPSUP2080
State Code
OBQ67
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030717 - Plant And Machine Operations
Original Release Date
20/08/2020
Nominal Hours
30
Description
This unit describes the skills and knowledge required to operate and monitor machines under supervision according to enterprise requirements.It applies to individuals working as machine-minders and off-siders assisting in the operation of a machine under direct supervision. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Operate and monitor production process
  • 1.1 Identify job specifications
  • 1.2 Monitor and adjust delivery systems
  • 1.3 Add substrate to and remove substrate from process
  • 1.4 Identify need for major adjustment and report to designated person according to enterprise operating procedures
  • 1.5 Monitor product and make minor adjustments as required according to quality output requirements
2. Identify and rectify problems and faults
  • 2.1 Identify and report faulty performance of equipment according to enterprise procedures within defined work area
  • 2.2 Identify machine faults requiring repair and report to designated person according to enterprise procedures
  • 2.3 Verify repairs and adjustments as required prior to resumption of operations
3. Conduct shutdown of production process
  • 3.1 Follow shutdown sequence according to manufacturer specifications and enterprise procedures
  • 3.2 Store unused materials according to manufacturer specifications and enterprise operating procedures
  • 3.3 Remove and store used plates, cutting and other devices
  • 3.4 Remove all product from operating area according to enterprise and work health and safety (WHS) requirements
  • 3.5 Clean and disengage all required parts of machinery used in printing process according to manufacturer specifications and enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
AUO65 ICPSUP208 Operate and monitor machines (basic) Unit of competency