Unit of competency Outline

Date retreived
22/07/2026 1:12 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Build a small wireless local area network

Build a small wireless local area network

Unit of competency
National Code
ICANWK405A
State Code
D7940
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
18/07/2011
View on TGA
State Implementation and Classification
Approved Date
06/10/2011
Field of Education
020113 - Networks And Communications
Original Release Date
06/10/2011
Nominal Hours
20
Description
This unit describes the performance outcomes, skills and knowledge required to build and arrange connectivity to a basic wireless local area network (WLAN).Note: If more than one wireless zone is required, then refer to ICANWK417A Build an enterprise wireless network.
Notes
Elements and Performance Criteria
1. Confirm client and equipment requirements
  • 1.1 Identify, clarify and organise client requirements according to network needs and organisational requirements
  • 1.2 Ensure an appropriate person has given the authority for wireless network access
  • 1.3 Evaluate requirements along with business needs and translate into technical requirements
  • 1.4 Identify components to be installed in order to meet the technical requirements
  • 1.5 Select position for access point, based on user requirements and environmental conditions
  • 1.6 Arrange for preliminary work to be carried out to meet cabling and power requirements
2. Select, install and configure wireless access point
  • 2.1 Select access point device based on current and future client needs
  • 2.2 Install and configure access point to provide wireless access to network
  • 2.3 Configure services
  • 2.4 Test access point and verify wireless connection and security arrangements
  • 2.5 Select, install and configure appropriate wireless card where necessary for legacy equipment
3. Configure network
  • 3.1 Configure security and other key parameters consistent with commercial and business requirements
  • 3.2 Test security and firewall arrangements with appropriate test equipment
  • 3.3 Test the network with user equipment for general compatibility and access
4. Train users
  • 4.1 Determine devices to be connected to the network
  • 4.2 Demonstrate how pairing and log-on arrangements are established to user
  • 4.3 Inform users of wireless network etiquette and traffic capacity issues
  • 4.4 Develop user documentation
5. Monitor and administer wireless network
  • 5.1 Monitor wireless network performance using diagnostic tools
  • 5.2 Debug networking issues to maintain trouble-free wireless connection
  • 5.3 Document current settings and store securely
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Client may include:
external organisations
individuals
internal departments
internal employees.
Organisational requirements may include:
preventative maintenance and diagnostic policy
problem-solving processes
roles and technical responsibilities in network management
vendor and product service level support agreements
work environment.
Components may include:
wireless access and software
hardware:
asymmetric digital subscriber line (ADSL) modems
antennas and other connectivity devices
mobile equipment
modems
wireless access points
networks
personal computers
power controllers
remote sites
servers
UPS
workstations
cabling:
category 5e
category 6
category 7
coaxial and fibre.
User may include:
department within the organisation
person within a department
third party
community members.
Network may include:
domestic
small enterprise WLANs.
Commercial and business requirements may include:
availability
backup and recovery of data
confidentiality
firewalls
hacking prevention
integrity
password logons
remote access to internal network.
Security may include:
AAA
Diameter
EAP or LEAP
IPSec
PKM
smart cards
SSL
tokens
WEP
WPA or WPA2.
Documentation may follow:
audit trails
client training
International Organization for Standardization (ISO), International Electrotechnical Commission (IEC) and Australian Standards (AS) standards
maintaining equipment inventory
naming standards
project management templates and report writing
satisfaction reports
version control.
Tools may include:
data and voice integration measurements
network performance software.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the ability to:
develop, implement and maintain wireless networks
install, configure and test wireless access points
test security and network to business specifications
develop user training material
monitor and resolve wireless network issues.
Context of and specific resources for assessment
Assessment must ensure access to:
network technical requirements
network infrastructure, including wireless hardware and software
appropriate learning and assessment support when required.
Where applicable, physical resources should include equipment modified for people with special needs.
Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
verbal or written questioning to assess candidate’s knowledge of underpinning knowledge and skills
direct observation of candidate performing the tasks required to successfully create a small WLAN
documentation produced in a small project environment that reflects understanding of client requirements and the technical skills required for a small WLAN.
Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, where appropriate.
Assessment processes and techniques must be culturally appropriate, and suitable to the communication skill level, language, literacy and numeracy capacity of the candidate and the work being performed.
Indigenous people and other people from a non-English speaking background may need additional support.
In cases where practical assessment is used it should be combined with targeted questioning to assess required knowledge.
Replaces
State Code National Code Title Type
D2801 ICAB4239C Build a small wireless local area network Unit of competency
Replaced By
State Code National Code Title Type
AUP76 ICTNWK405 Build a small wireless local area network Unit of competency