Unit of competency Outline

Date retreived
22/07/2026 10:53 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble and install pneumatic system components

Assemble and install pneumatic system components

Unit of competency
National Code
AURTTA014
State Code
AXB00
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030701 - Mechanical Engineering
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to assemble and install pneumatic system components. It involves preparing for the task, assembling and installing pneumatic system components, performing post-assembly testing, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The pneumatic systems include those of agricultural machinery, heavy commercial vehicles or mobile plant machinery.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to assemble, install and test pneumatic system components
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Assembly, installation and test procedures and information are sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.3 Tools and equipment are selected and checked for serviceability
2. Carry out assembly and installation activities
  • 2.1 Pneumatic system components are assembled according to job requirements
  • 2.2 Components are installed according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 2.3 Components are adjusted according to manufacturer specifications and workplace procedures, and without causing damage to components or system
3. Test pneumatic system
  • 3.1 Testing procedures and information are sourced and interpreted from manufacturer procedures and specifications
  • 3.2 System tests are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 3.3 Post-assembly testing is carried out according to workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and pneumatic system is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF382 AURTTA3014 Assemble and install pneumatic systems and components Unit of competency