Unit of competency Outline

Date retreived
23/07/2026 4:58 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Joint and terminate coaxial cable

Joint and terminate coaxial cable

Unit of competency
National Code
ICTCBL252
State Code
OBA67
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
30/08/2019
View on TGA
State Implementation and Classification
Approved Date
27/11/2019
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
27/11/2019
Nominal Hours
60
Description
This unit describes the skills and knowledge required to install, joint and terminate coaxial cable in the customer access network (CAN) environment for emerging technologies using high speed broadband and the delivery of cable television services on customer premises for domestic, commercial or industrial installations.It applies to technical staff who joint and terminate coaxial cable used in all telecommunications applications, including convergence technologies of telephony, data, video and multimedia as part of next generation networks (NGNs).Licensing, legislative, regulatory and certification requirements apply to telecommunications systems. All customer cabling work in the telecommunications, fire, security and data industries must be performed by a registered cabler. All cablers are required to register with an Australian Communications and Media Authority (ACMA) accredited registrar. Refer to the ICT Information and Communications Technology Training Package Companion Volume Implementation Guide or the relevant regulator for details of licensing, legislative or certification requirements.
Notes
Elements and Performance Criteria
1. Prepare to install and joint coaxial cable
  • 1.1 Confirm approval for site access with customer prior to site entry
  • 1.2 Read and interpret customer installation specifications and physical conditions at site to determine layout of job
  • 1.3 Locate and identify adjoining other services according to enterprise guidelines and work health and safety (WHS) practices
  • 1.4 Test for and respond to presence of dangerous gases in underground enclosures according to enterprise guidelines
  • 1.5 Undertake approved alterations to design according to enterprise guidelines
2. Verify placement and secure coaxial cable
  • 2.1 Use safety equipment to protect self and public
  • 2.2 Maintain coaxial cable segregation to industry standard requirements
  • 2.3 Protect integrity of coaxial shield cable to ensure no loss of performance
  • 2.4 Place cable in position with sufficient slack to allow termination and maintain minimum bend radius according to manufacturer specifications
  • 2.5 Follow installation designs to install cable safely without damage to cable or customer premises
  • 2.6 Maintain radio frequency (RF) signal strength by installing cable lengths within manufacturer or design specifications
  • 2.7 Locate securing hardware to reduce cumulative effect on cable wave shape properties and attach cable ties to minimise cable damage
3. Joint coaxial cable
  • 3.1 Strip coaxial cable, according to specifications, to required length using appropriate tools
  • 3.2 Select appropriate kit to match type of coaxial cable in use and jointing method according to manufacturer recommendations
  • 3.3 Joint cable and ensure jointing fitting retains segregation of conductor and shield
  • 3.4 Seal all joints according to manufacturer specifications
4. Terminate coaxial cable
  • 4.1 Prepare coaxial cable for termination according to specifications using appropriate tool
  • 4.2 Select connectors to match type of coaxial cable in use and use terminating method recommended by manufacturer
  • 4.3 Verify connector fitting retains segregation of conductor and shield
  • 4.4 Terminate connectors to torque as recommended by manufacturer to prevent RF leakage
  • 4.5 Test connectors to mating specifications using gauge tester
  • 4.6 Maintain continuous ground on terminations and waterproof seal to preserve cable integrity
5. Complete installation operation
  • 5.1 Place cables in enclosure and lay up according to manufacturer instructions and enterprise guidelines, and check that no safety hazards are evident
  • 5.2 Place other services including cables according to enterprise guidelines
  • 5.3 Reinstate site, remove waste and debris for disposal, and maintain safe worksite conditions
6. Complete installation administration
  • 6.1 Complete reports according to enterprise policy
  • 6.2 Note alterations to plans using appropriate symbols
No information
No information
Replaces
State Code National Code Title Type
AWG40 ICTCBL209 Joint and terminate coaxial cable Unit of competency