Qualification Outline
22/07/2026 5:14 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Telecommunications Technology
Certificate II in Telecommunications Technology
ICT20319
BEQ4
Current
Approved
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 3.00 | 03/02/2022 | Current | Approved |
| 2.00 | 12/02/2021 | Replaced | Approved |
| 1.00 | 30/08/2019 | Replaced | Approved |
Description
This is an entry-level qualification for telecommunications technology operators who may:
install telecommunications equipment, data cabling and cabling products on customer premises
perform fault-finding on a limited range of digital reception equipment for both cable television and free-to-air television reception, for either a customer or an enterprise
install and maintain telecommunications radio communications equipment in base stations and connect wireless base stations
install and maintain telecommunications equipment on high structures including radio towers or for installation and connection of wireless base stations.
The qualification is suited to an individual undertaking work experience, or in a probationary period in employment.
It is particularly applicable to school-based delivery as an entry-level pathway to employment and is suitable as an Australian traineeship or apprenticeship pathway, except for the units of competency that involve high-risk work age restrictions.
Licensing/Regulatory Information
Work functions in the occupational areas where this qualification may be used are subject to regulatory requirements. Refer to the ICT Information and Communications Technology Companion Volume Implementation Guide or the relevant regulator for details of licensing, legislative or certification requirements.
Cabling at the customer premises must be carried out according to requirements of the Australian Communications and Media Authority (ACMA) and relevant industry registration bodies, and in line with the specifications of the access network owner.
High risk work (HRW) licences are required for dogging work and rigging as outlined on the Safe Work Australia website.
The model WHS Regulations require people performing HRW to be over 18 years of age and to hold the right HRW licence. HRW licences are issued by state/territory governments: refer to the relevant body to ensure compliance with regulations.
Schedule
Packaging Rules
Total number of units = thirteen (13)- Seven (7) core units, plus
- Six (6) elective units
The elective units selected may consist of:
- up to six (6) units from any group of elective units listed below according to the specialisation packaging rules, outlined below, where a specialisation is the required outcome
- up to two (2) units from this Training Package or any currently endorsed Training Package or accredited course where the units are packaged in an Australian Qualifications Framework (AQF) Level 2 or 3 qualification.
Elective units must be relevant to the work environment and the qualification, maintain the integrity of the AQF alignment, not duplicate the outcome of another unit chosen for the qualification, and contribute to a valid, industry-supported vocational outcome.
Units selected from other Training Packages or accredited courses must not duplicate units selected from, or available within, the ICT Information and Communications Technology Training Package.
Pre-requisites:
Please check TGA for prerequisite unit requirements.
Specialisations
Where relevant, specialisations can be used for this qualification in:
- cabling
- networking
- radio communications
- rigging
- telecommunications cabling.
The achievement of a specialisation will be identified on testamurs as follows:
- ICT20319 Certificate II in Telecommunications Technology (Cabling)
- ICT20319 Certificate II in Telecommunications Technology (Telecommunications Cabling)
- ICT20319 Certificate II in Telecommunications Technology (Networking)
- ICT20319 Certificate II in Telecommunications Technology (Radio Communications)
- ICT20319 Certificate II in Telecommunications Technology (Rigging).
Cabling
Select six (6) elective units from Group A Cabling.
Telecommunications Cabling
Select the following two (2) elective units from Group A Cabling:
- ICTCBL246 Install, maintain and modify customer premises communications cabling: ACMA Restricted Rule*
- ICTCMP203 Perform restricted customer premises broadband cabling work: ACMA Restricted Rule*
Select four (4) further elective units from the remaining elective units in Group A Cabling.
Networking
Select the four (4) elective units from Group B Networking.
Radio Communications
Select the four (4) elective units from Group C Radio Communications.
Select at least one (1) elective unit from Group D Rigging.
Rigging
Select the three (3) elective units from Group D Rigging.
Note: This specialisation is not suitable for school-based delivery due to high-risk work age restrictions.
1. Core Units
All seven (7) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AUK74 | BSBCUS201 | Deliver a service to customers | 40 | Unit of competency |
| AWC80 | ICTWHS204 | Follow work health and safety and environmental policy and procedures | 35 | Unit of competency |
| AWD58 | ICTTEN207 | Install and test internet protocol devices in convergence networks | 45 | Unit of competency |
| OBA46 | ICTTEN208 | Use electrical skills when working with telecommunications networks | 35 | Unit of competency |
| AWG35 | ICTTEN202 | Use hand and power tools | 40 | Unit of competency |
| OBA44 | ICTTEN211 | Work effectively in a telecommunications network environment | 25 | Unit of competency |
| OBA30 | ICTWOR202 | Work effectively in the digital and telecommunications industry | 20 | Unit of competency |
2. Group A Cabling
Up to six (6) units from any group of elective units listed according to the specialisation packaging rules.
Please refer to the packaging rules for the full details of available options.
3. Group B Networking
Up to six (6) units from any group of elective units listed according to the specialisation packaging rules.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AWD60 | ICTTEN205 | Build and maintain a secure network | 70 | Unit of competency |
| AWD62 | ICTTEN203 | Install and configure a home or small office network | 55 | Unit of competency |
| AWD61 | ICTTEN204 | Install and configure a small to medium business network | 55 | Unit of competency |
| AWD59 | ICTTEN206 | Operate new media software packages | 35 | Unit of competency |
4. Group C Radio Communications
Up to six (6) units from any group of elective units listed according to the specialisation packaging rules.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AWD95 | ICTRFN304 | Construct and test a radio communications device | 40 | Unit of competency |
| AWE00 | ICTRFN201 | Install a satellite antenna | 40 | Unit of competency |
| AWD99 | ICTRFN202 | Install a terrestrial antenna | 40 | Unit of competency |
5. Group D Rigging
Up to six (6) units from any group of elective units listed according to the specialisation packaging rules.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| OCO88 | CPCCLDG3001 | Licence to perform dogging | 80 | Unit of competency |
| OCQ72 | CPCCLRG3001 | Licence to perform rigging basic level | 96 | Unit of competency |
| AWD67 | ICTTCR203 | Use safe rigging practices to climb and perform rescues on telecommunications network structures | 40 | Unit of competency |
6. Group E General Elective Units
Up to six (6) units from any group of elective units listed according to the specialisation packaging rules.
Please refer to the packaging rules for the full details of available options.
Please note:
- HLTAID009 or HLTAID011 may be chosen, NOT both.
- ICTWHS205 or UETTDREL14A may be chosen, NOT both
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AZJ6 | ICT20315 | Certificate II in Telecommunications Technology | Qualification |
No information
Entry Requirements
Nil.
Traineeships and Apprenticeships