Unit of competency Outline
Date retreived
23/07/2026 4:39 AM AWST
23/07/2026 4:39 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Install and test internet protocol devices in convergence networks
Install and test internet protocol devices in convergence networks
Unit of competency
National Code
ICTTEN207
ICTTEN207
State Code
AWD58
AWD58
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
45
Description
This unit describes the skills and knowledge required for entry-level installations and testing for internet protocol (IP) based telecommunications networking, using convergent technologies to deliver services of Next Generation Networks (NGN).It applies to technicians and cable installers who install and maintain IP-based equipment for customer and service providers for NGN services, including internet protocol TV (IPTV), IP security, digital home networks, IP-based cable access TV (CATV), IP core and access networks, home automation, interactive TV, radio frequency identification (RFID), biometric recognition systems, mesh networks, smart grids and cloud computing.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Gather information to prepare for installation of IP device
- 1.1 Obtain work health and safety (WHS) requirements and environmental requirements for a given work area, and clarify with appropriate personnel
- 1.2 Identify safety hazards and notify appropriate personnel
- 1.3 Obtain identified operating instructions, manuals, and hardware and software testing methodologies
- 1.4 Obtain documentation on a range of IP devices that can be networked according to the open system interconnection (OSI) reference model in networking
- 1.5 Obtain the range of required IP devices to be connected to the network and identify the IP-based telecommunications application that will be provided
2. Prepare for installation of IP device
- 2.1 Select IP device for installation that can be integrated into existing network
- 2.2 Obtain appropriate hardware, software, network protocols, peripheral devices and media types and connectors for configuration process
- 2.3 Draw physical topology of the device connection to network and seek approval from appropriate personnel
- 2.4 Obtain configuration details to start setting up device
3. Configure and test IP device
- 3.1 Determine network addressing scheme for mapping network connectivity and verify by calculations
- 3.2 Assign a valid static IP address to device
- 3.3 Use network commands to determine and verify the media access control (MAC) address, the IP address and network performance of the device
- 3.4 Determine security threats and initiate security solutions to prevent security breaches according to enterprise procedures
4. Complete and document network installation
- 4.1 Restore worksite to safe condition according to established safety procedures
- 4.2 Record and store essential installation information according to enterprise procedures
- 4.3 Notify appropriate person of task completion according to enterprise procedures
5. Test wireless link
- 5.1 Select types of wireless connections used in telecommunications
- 5.2 Set up a wireless link to connect two wireless devices, following safe work practices
- 5.3 Transmit data over the link and verify accuracy of received data
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI911 | ICTTEN2219A | Install and test internet protocol devices in convergence networks | Unit of competency |