Unit of competency Outline

Date retreived
23/07/2026 8:37 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install a satellite antenna

Install a satellite antenna

Unit of competency
National Code
ICTRFN201
State Code
AWE00
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
40
Description
This unit describes the skills and knowledge required to assemble, connect, align and test equipment according to plans, specifications and site specific requirements. It applies to individuals who work on single and multiple dwellings, commercial buildings, telecommunications structures and at ground level to enable signals from geostationary communications satellites. Installations might be new or existing, stand alone or be a part of a site with multiple antennas.Work functions in the occupational areas where this unit may be used are subject to regulatory requirements. Refer to the ICT Implementation Guide Companion Volume or the relevant regulator for details of licensing, legislative or certification requirements.
Notes
Elements and Performance Criteria
1. Prepare for work on satellite antenna
  • 1.1 Prepare for installation, applying all relevant legislation, codes, regulations and standards, and identify any safety issues
  • 1.2 Organise resources to be available on site
  • 1.3 Contact client to arrange access to site and notify about possible outage
  • 1.4 Organise tools and equipment and ensure they are in safe working order and adjusted to manufacturer's specifications
  • 1.5 Obtain details of satellite to be acquired and precise details of satellite antenna location
  • 1.6 Determine azimuth and elevation for satellite receiving antenna
  • 1.7 Determine polarisation angle of satellite receiving antenna feedhorn
  • 1.8 Determine suitable position to mount antenna with agreement from client
2. Assemble and mount satellite antenna and cables
  • 2.1 Assemble satellite antenna on site according to plans, specifications and enterprise guidelines using safe industry practices
  • 2.2 Connect coaxial cable to antenna and install lightning protection devices
  • 2.3 Mount satellite antenna on to installed mounting arrangements and set initial antenna azimuth, elevation and polarisation
3. Test and align antenna system
  • 3.1 Connect installed antenna system to satellite receiver or test equipment and make final adjustments to azimuth, elevation and polarisation to optimise signal level and quality
  • 3.2 Conduct performance tests according to manufacturer's specifications and enterprise guidelines
  • 3.3 Interpret test results, compare with manufacturer's design specifications and make adjustments
4. Complete administrative duties
  • 4.1 Record test results and complete appropriate records
  • 4.2 Secure and clean up site to original condition in environmentally safe manner
  • 4.3 Notify client of work completion and obtain sign off
No information
No information
Replaces
State Code National Code Title Type
WI903 ICTRFN2163B Install a satellite antenna Unit of competency