Unit of competency Outline

Date retreived
22/07/2026 6:40 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform factory control tests

Perform factory control tests

Unit of competency
National Code
FBPSUG3007
State Code
OAL87
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
18/12/2018
View on TGA
State Implementation and Classification
Approved Date
18/04/2019
Field of Education
030307 - Food Processing Technology
Original Release Date
18/04/2019
Nominal Hours
80
Description
This unit of competency describes the skills and knowledge required to perform tests for factory control. These tests are typically complex and/or non-routine and require interpretation of results within broad guidelines.The unit applies to individuals working in the sugar industry who are required to perform factory control tests and record data in a sugar mill.All work must be carried out to comply with workplace procedures according to state/territory health and safety regulations, legislation and standards that apply to the workplace. No occupational licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for testing
  • 1.1 Identify testing requirements and methods according to workplace requirements
  • 1.2 Select, fit and use personal protective equipment according to workplace procedures
  • 1.3 Manage calibration of test equipment according to operating procedures
  • 1.4 Prepare standard graphs according to workplace procedures
  • 1.5 Prepare and label test chemicals and reagents according to workplace procedures
  • 1.6 Prepare samples as required by test method
  • 1.7 Conduct and record pre-test checks according to workplace procedures
2. Conduct test
  • 2.1 Perform test according to test method and test schedule
  • 2.2 Identify and report atypical test results
  • 2.3 Record and communicate test results according to recordkeeping requirements
  • 2.4 Follow procedures to repeat or validate results
  • 2.5 Clean, care for and store equipment according to workplace procedures
  • 2.6 Dispose of waste materials according to workplace procedures
3. Record test data in laboratory information system
  • 3.1 Enter results into laboratory information systems according to workplace procedures
  • 3.2 Correct data entry errors as required
  • 3.3 Store and retrieve data in the laboratory information system according to workplace procedures
  • 3.4 Produce standard and non-standard reports from laboratory information system
No information
No information
Replaces
State Code National Code Title Type
WD868 FDFSUG307A Perform factory control tests Unit of competency