Unit of competency Outline

Date retreived
22/07/2026 3:25 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair corroded vehicle body panels and components

Repair corroded vehicle body panels and components

Unit of competency
National Code
AURVTN025
State Code
AWZ67
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030511 - Panel Beating
Original Release Date
13/07/2016
Nominal Hours
32
Description
This unit describes the performance outcomes required to repair vehicle body panels and components that have been damaged by corrosion. It involves preparing for the task, selecting and using specialist tools and equipment, removing corroded damage, fabricating replacement components, fitting and welding vehicle body components, finishing repairs to pre-paint condition, and completing workplace processes and documentation.It applies to those working in the automotive body repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to repair corroded panel sections
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Repair material is selected and checked for quality
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and equipment are selected and checked for serviceability
  • 1.5 Work is planned to identify repair methods, minimise waste, and use time efficiently
2. Remove corroded sections
  • 2.1 Corroded vehicle body panel and components are identified
  • 2.2 Body section is assessed to determine appropriate repair method
  • 2.3 Corroded panel is removed according to workplace procedures and safety and environmental requirements, and without causing damage to vehicle or components
  • 2.4 Assistance is sought from authorised personnel where removal of components disturbs vehicle trim or electrical, mechanical or air conditioning systems
3. Reform and replace corroded sections
  • 3.1 Repair material is selected according to vehicle manufacturer specifications
  • 3.2 Corroded panel section is measured and formed use forming equipment
  • 3.3 Panel section is repaired or reformed using approved methods and equipment
  • 3.4 Repaired corroded section is replaced, welded and finished
  • 3.5 Replaced section is checked for compliance against vehicle manufacturer specifications
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets workplace expectations and panel is presented ready for painting
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF511 AURVTN3025 Repair corroded panels and components Unit of competency