Unit of competency Outline

Date retreived
22/07/2026 12:54 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test suspension dampers using a dynamometer

Test suspension dampers using a dynamometer

Unit of competency
National Code
AURMTD001
State Code
AXB94
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
32
Description
This unit describes the performance outcomes required to use a dynamometer to test suspension dampers on a competition vehicle. It involves preparing for the task, conducting suspension damper testing, analysing and interpreting test results in order to maximise damper, and completing processes and documentation, including any associated recommendations for further action. It applies to those working in the motor sport industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for dynamometer operation
  • 1.1 Job requirements are determined from team instructions, category regulations and manufacturer procedures
  • 1.2 Dynamometer is checked for calibration and serviceability, and is prepared for operation according to manufacturer specifications and team procedures
  • 1.3 Hazards associated with the work are identified and risks are managed according to safety requirements
  • 1.4 Tools and equipment for securing dampers are selected and checked for serviceability
2. Conduct dynamometer testing
  • 2.1 Appropriate load and run sequence and test parameters are determined
  • 2.2 Dampers are connected and secured to dynamometer according to manufacturer specifications and team procedures
  • 2.3 Selected dynamometer testing sequence is carried out according to manufacturer and team procedures and safety requirements, and results are documented
  • 2.4 Dynamometer test data is analysed and conclusions are drawn about damper condition and performance according to manufacturer specifications and team procedures
  • 2.5 Findings are reported to appropriate personnel, including recommendations based on dynamometer data for damper configuration or modifications to improve performance, according to team procedures
  • 2.6 Damper modifications are carried out and tested on dynamometer according to manufacturer specifications, team procedures and safety requirements as required
  • 2.7 Data is presented to team members according to team procedures
3. Complete work processes
  • 3.1 Dynamometer shutdown procedure is carried out according to manufacturer specifications, team procedures and safety requirements
  • 3.2 Dampers are disconnected from dynamometer according to manufacturer specifications and team procedures
  • 3.3 Dynamometer, tools and associated equipment are checked, maintained and stored according to workplace procedures
  • 3.4 Dynamometer test results are documented and stored according to team procedures to create or add to damper history
No information
No information
Replaces
State Code National Code Title Type
WF284 AURMTD4001 Test suspension dampers using a dynamometer Unit of competency