Unit of competency Outline

Date retreived
22/07/2026 12:16 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce basic collated or inserted (sheet/section) product

Produce basic collated or inserted (sheet/section) product

Unit of competency
National Code
ICPCBF244
State Code
AUM67
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
40
Description
This unit describes the skills and knowledge required to produce a basic collated or inserted sheet or section product, monitor and adjust machinery, maintain transportation of the substrate, identify and rectify faults, and correctly clean and shut down equipment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Maintain operation of sheet/section transportation system on machine
  • 1.1 Feeder and delivery systems are monitored and adjusted to ensure continuous and efficient feeding to machine
  • 1.2 Sheet/section pick-up and transport system is monitored and adjusted to ensure accurate and continuous sheet handling and efficient operation
  • 1.3 Transfer systems are monitored and adjusted to ensure correct and continuous sheet handling and efficient operation
  • 1.4 Substrate is added to process according to job specifications
2. Maintain production process
  • 2.1 Collating or inserting process is monitored and adjusted to ensure product quality meets the approved sample standard
  • 2.2 Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule
  • 2.3 Production is maintained according to work health and safety (WHS) requirements, manufacturer’s specifications and enterprise procedures
  • 2.4 Manual and/or automatic control is used according to job specifications
  • 2.5 Performance is monitored and verified using the process control system according to enterprise procedures
  • 2.6 Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention
  • 2.7 Process adjustments to eliminate problems are reported according to enterprise procedures
  • 2.8 Waste is sorted according to enterprise procedures
  • 2.9 Basic in-line printing/converting/binding/finishing process(es) are monitored and adjusted to ensure product quality meets the approved sample standard
3. Identify and rectify problems and faults
  • 3.1 Problems in collating or inserting (sheet/section) machine are identified and reported according to enterprise procedures
  • 3.2 Adjustments or corrections are carried out according to specified procedures, and are consistent with operator’s skill level
  • 3.3 Collating or inserting (sheet/section) machine operation is checked to ensure correct operation
  • 3.4 Machine faults requiring repair are identified and reported to designated person according to enterprise procedures
  • 3.5 Repair/adjustment is verified prior to resumption of operations
4. Conduct shutdown of production process
  • 4.1 Correct shutdown sequence is followed according to manufacturer’s specifications and enterprise procedures
  • 4.2 Shutdown is conducted in association with fellow workers and in compliance with WHS requirements
  • 4.3 Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures
5. Clean (sheet/section) machine at end of run
  • 5.1 Collating or insert machine is cleaned ready for next run
  • 5.2 In-line printing/converting/binding/finishing units are cleaned ready for next run
  • 5.3 Sheet feed, transport and delivery systems are disengaged and cleaned ready for next run
  • 5.4 Production records or other documentation are accurately completed where required by enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
D3032 ICPCF244C Produce basic collated or inserted (sheet/section) product Unit of competency
Replaced By
State Code National Code Title Type
OBP38 ICPCBF2440 Produce basic collated or inserted (sheet/section) product Unit of competency