Unit of competency Outline

Date retreived
22/07/2026 11:24 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform intermediate rigging operations

Perform intermediate rigging operations

Unit of competency
National Code
RIIHAN210D
State Code
WH304
TGA Status
Current
DTWD Status
Approved
Current Release Number
4.00
Current Release Date
11/12/2018
View on TGA
State Implementation and Classification
Approved Date
28/05/2014
Field of Education
040329 - Scaffolding And Rigging
Original Release Date
28/05/2014
Nominal Hours
40
Description
This unit describes the skills and knowledge required to perform intermediate rigging operations, including planning for intermediate rigging, preparing rigging equipment and moving loads.This unit is appropriate for those working in site-based roles.The work required in this unit relates to the National Standard for High Risk Work but this unit does not provide the licence. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories and industry sectors, and must be sourced prior to applying this unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for intermediate rigging
  • 1.1 Access, interpret and apply rigging documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements before commencing
  • 1.3 Select and wear personal protective equipment appropriate for work activities
  • 1.4 Develop a written preliminary rigging plan and site sketch considering essential information
  • 1.5 Follow safety information including signage/barricade requirements
  • 1.6 Check and confirm job feasibility and schedule with the client, the load designer and other relevant persons
  • 1.7 Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.8 Finalise and confirm rigging plan including the scheduling of required resources
2. Prepare intermediate rigging equipment
  • 2.1 Identify, select, inspect, assemble and confirm as serviceable rigging equipment, materials and tools required for the plan
  • 2.2 Label for repair or disposal unserviceable equipment, materials and tools
  • 2.3 Identify requirement and install fall arrest equipment with ground level installation
  • 2.4 Determine and select personal cartage systems
3. Move loads
  • 3.1 Calculate and confirm appropriate safe working loads and centre of gravity using load charts and standard calculation rules prior to load moving
  • 3.2 Perform load moving in accordance with the plan and acceptable safe work practices
  • 3.3 Perform work safely at heights, within incomplete structures and/or in confined and enclosed spaces
  • 3.4 Connect lifting gear to load to Australian standards and manufacturer’s specifications
  • 3.5 Connect load to movement device using appropriate and certified equipment
  • 3.6 Ensure stability of the load by application of load movement procedure, temporary bracing and/or load support appropriate to the task
  • 3.7 Move load to required destination and secure in position
  • 3.8 Follow appropriate designer’s specifications during the placement and securing of the load
  • 3.9 Dismantle and remove/restore load shifting equipment
4. Clean up
  • 4.1 Clear work area and dispose, reuse or recycle materials
  • 4.2 Clean, check, maintain and store plant, tools and equipment
  • 4.3 Apply work completion procedures, notify personnel of work completion
No information
No information
No information