Qualification Outline
22/07/2026 4:58 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Underground Metalliferous Mining
Certificate II in Underground Metalliferous Mining
RII20413
J668
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 3.00 | 07/12/2014 | Current | Approved |
Description
This qualification reflects the role of individuals, such as an operator working in an underground metalliferous mine, who perform a range of mainly routine tasks using limited practical skills and fundamental operational knowledge in a defined context, working under direct supervision.
Licensing, legislative, regulatory and certification requirements that apply to this qualification can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the qualification.
Schedule
Packaging Rules
Successful completion of ten (10) units of competency made up of:- five (5) core units, and
- five (5) elective units of which:
- at least three (3) must be chosen come from group A
- up to two (2) may be chosen from group B and/or group C
- up to one (1) unit may be chosen from Certificate II or Certificate III level from this, or any other Training Package or accredited course.
Units chosen must be relevant to the job function.
There are both licensed and non-licensed units of competency relating to high risk work in the Resources and Infrastructure Industry Training Package. To be appointed under any statutory requirements in related roles, units of competency should be selected to meet the state/territory licensing requirements.
There are no prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.
1. Core Units
All five (5) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WH099 | RIICOM201D | Communicate in the workplace | 20 | Unit of competency |
| WH644 | RIIRIS201D | Conduct local risk control | 20 | Unit of competency |
| WH616 | RIIQUA201D | Maintain and monitor site quality standards | 40 | Unit of competency |
| D1021 | BSBSUS201A | Participate in environmentally sustainable work practices | 10 | Unit of competency |
| WH750 | RIIWHS201D | Work safely and follow WHS policies and procedures | 30 | Unit of competency |
2. Group A Elective Units
At least three (3) must be chosen come from Group A.
Please refer to the packaging rules for the full details of available options.
3. Group B Elective Units
Up to two (2) may be chosen from Group B and/or Group C.
Please refer to the packaging rules for the full details of available options.
4. Group C Elective Units
Up to two (2) may be chosen from Group B and/or Group C.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D5247 | TLILIC3003A | Licence to operate a bridge and gantry crane | 70 | Unit of competency |
| D5241 | TLILIC2001A | Licence to operate a forklift truck | 40 | Unit of competency |
| D5249 | TLILIC3006A | Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity) | 60 | Unit of competency |
| W9423 | CPCCLDG3001A | Licence to perform dogging | 80 | Unit of competency |
| W9426 | CPCCLRG3001A | Licence to perform rigging basic level | 96 | Unit of competency |
| W9427 | CPCCLRG3002A | Licence to perform rigging intermediate level | 24 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W657 | RII20409 | Certificate II in Underground Metalliferous Mining | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AZE8 | RII20415 | Certificate II in Underground Metalliferous Mining | Qualification |
VET Info Notes
Entry Requirements
There are no entry requirements for this Qualification.
Traineeships and Apprenticeships